Just aquired 1996 Grand Cherokee Limited after starting any new trip brakes pulsate the first time they are used then not again until another trip. new rotors pads e-brake shoes any ideas?

 

New rotors and pads should take care of it. Torque the lug nuts to 100ftlbs.

 

misleading post; it has new rotors, pads and e-brake shoes

 

It's possible it's just overnight rust that has to be wiped of the first time you use them. I'm just guessing? Either that or you've got something under a rotor on the mounting surface. That usually is constant, though.

 

Is the abs light on or flash when you have the problem,Or any abs codes showing up?

 

The abs light is on occasionally but not constant

 

It is not a daily event, it is happening every time the vehicle is started and driven

 

Do you feel it in the pedal, or does the whole vehicle shake?

 

There is also a proper break-in procedure for new rotors and pads.

 

Just feel it in pedal the first time using brakes after every start up

 

Does it do it right after you start the engine without even moving? If so, it's just the ABS doing its self check.

 

No only after the vehicle moves, I have bleed the brakes no air