After market wj radiator
#1
Member
Thread Starter
Join Date: Nov 2010
Location: Battle Ground WA
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 HO 6cy
After market wj radiator
Hey does anyone know if there are any all aluminum radiators for a 4.0 wj all I can find is after market ones that still have the plastic tanks?
#2
Old fart with a wrench
I've done some research myself and only found ones with plastic tanks. I think it has to do with expansion rates and leak problems because of this. I know Corvettes and Cadillacs had problems with their all-aluminum radiators.
Last edited by dave1123; 01-31-2014 at 01:27 AM.
#3
Member
Thread Starter
Join Date: Nov 2010
Location: Battle Ground WA
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 HO 6cy
Yeah me too it sucks on my xj the plastic cracked and I got an all aluminum radiator but on my brothers wj the plastic tank actual exploded!
#4
Old fart with a wrench
There is only one reason for a rad to explode. Too much pressure, be it rad cap or blown head gasket. If the rad cap holds too much pressure or not enough causing steam to build up, either one is a problem.
A stuck thermostat could cause overpressure also.
A stuck thermostat could cause overpressure also.
#5
Member
Thread Starter
Join Date: Nov 2010
Location: Battle Ground WA
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 HO 6cy
Replaced the t stat and rad cap and water pump and re sealed them all right before the radiator exploded. And it doesn't eat any water at all. But got a new radiator and it don't over heat anymore so I guess problem solved lol
Thread
Thread Starter
Forum
Replies
Last Post
jeepdewd
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
20
08-02-2016 01:29 AM
Crazynut1997
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
15
09-29-2015 08:14 PM
Jbri22
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
09-26-2015 04:30 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)