1999jeep

ok so heres some my problums.The jeep is a 99 grand cherokee 4.0L 120,000miles fair shape.

so my first thing is i needed a tranny mount so i went to the parts store (advanced auto) got the mount,well its not the right mount its the right part for what they list a 99 ,but its wrong they say the one for a 98 is what i need....sound right?If thats the case will any othe parts i need be for a 98?

my second thing is pinion bearings can anyone show me a write up or give me some guidance on what tools i need to do the job and mabey any tricks that may help out?

troy fritz

I have a 96 and have to get parts for 95,96 and 97

1999jeep

thats messed up

1999jeep

nobody has any ideas on the tools or experince doing this job,i really need some helpfinding all the right tools and parts without breaking the bank

ol"blue

The ZJ stopped in '98 and the WJ started in '99 so you have to get '99 (or newer) parts. '98 and older won't work.
Here's a generic write-up on the rear gears/bearings. > http://www.ehow.com/how_5149943_chan...ion-gears.html
Hope it's helpful.

1999jeep

well went to get the new mount and its wrong too i dont get it what the hell mount do i need?
is there somewhere i can put my vin number in and find out what parts i need?

1999jeep

also needed a crank sensor anyone ever do that? how hard is it? plus i wonder if that is the right part... the way the tranny mount has been going guesss this time ill take the old one off and take it withe me.. lot of good that will do me since they always have to order the part

ol"blue

Here's a write-up w/pics showing the replacement of the CPS. >http://www.go.jeep-xj.info/HowtoCPSchange.htm
Hope it's helpful.