94 gcl neutral safety switch
Thread Starter
Junior Member
Joined: Sep 2012
Posts: 38
Likes: 0
Year: 1994
Model: Grand Cherokee
Engine: 4.0
94 gcl neutral safety switch
I have the 3 prong style on the drivers side of the trans.When I go to remove it do I need to worry about losing fluid while it is out?Also is there any to know which way it is in to make sure the pins are in the right order.It is tough to see with the drive shaft in the way.Any other things I should look for please let me know.Thanks
Thread Starter
Junior Member
Joined: Sep 2012
Posts: 38
Likes: 0
Year: 1994
Model: Grand Cherokee
Engine: 4.0
Thanks,Since it looks like the center pin is the the common power to the outer pins it would make a difference if the outer pins were not in the right position. So when the switch is fully tight the configuration of the pins will be correct? Thanks again
CF Veteran
Joined: Feb 2010
Posts: 12,367
Likes: 23
From: Oroville, CA
Year: 1995
Model: Grand Cherokee
Engine: 4.0 with all of the noise and clatter
Not always, but the plug will only go on one way.
Thread
Thread Starter
Forum
Replies
Last Post
tleed
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
17
Mar 24, 2019 12:22 PM
cbs_24
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
Oct 3, 2015 09:53 AM
Eli Brda
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Sep 27, 2015 04:13 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)