46RH Gearshift Cable Won't Retain Adjustment
12-29-2015, 05:05 PM
#1
Senior Member
Thread Starter
46RH Gearshift Cable Won't Retain Adjustment
The gearshift cable on my 94 ZJ 5.2L 46RH does not maintain adjustment.
This linked video shows that the transmission shift lever can be moved rearwards (left) (towards Park) and the engine will start normally. But if the lever is moved forward (right), then the engine won't start.
I think this movement should not exist.
The cable assembly has a red spring that is retained by a collar. On my cable the collar has a split.
Is this collar supposed to be intact and does this get pushed forward to retain the adjustment, getting rid of the slop?
The tangs on both ends of the cable are fully engaged to retain onto their mounting brackets, on the transmission and at the gearshift lever housing.
Transmission Shift Lever Movement Video
This linked video shows that the transmission shift lever can be moved rearwards (left) (towards Park) and the engine will start normally. But if the lever is moved forward (right), then the engine won't start.
I think this movement should not exist.
The cable assembly has a red spring that is retained by a collar. On my cable the collar has a split.
Is this collar supposed to be intact and does this get pushed forward to retain the adjustment, getting rid of the slop?
The tangs on both ends of the cable are fully engaged to retain onto their mounting brackets, on the transmission and at the gearshift lever housing.
Transmission Shift Lever Movement Video
Thread
Thread Starter
Forum
Replies
Last Post
rangermonroe
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
29
01-08-2016 03:15 PM
Stickpin
Aftermarket electrical systems
2
12-29-2015 10:21 PM
99stomperXJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
12-29-2015 04:42 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)