2005 grand cherokee laredo 4.7l
#1
Newbie
Thread Starter
Join Date: Jul 2013
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
2005 grand cherokee laredo 4.7l
I am replacing oil pan , mine rusted out. having trouble getting the pan off, all bolts are out, tried hitting sides w/ a dead blow hammer but not budging, tried to separate w/ screwdriver. do I need to remove bolts inside the pan that holds the tray? or should the pan separate from the tray. any help would greatly be appreciated. thx
#2
Old fart with a wrench
My Haynes manual says to remove the oil pump pickup and windage tray as well, but it says the pan should come loose with a rubber hammer. There are 18 bolts and studs holding it. Also the starter and trans support bracket need to be removed first. My book only lists the 2004 as the latest.
Thread
Thread Starter
Forum
Replies
Last Post
majen66
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
7
07-11-2018 02:39 PM
lozo63
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
08-27-2015 05:45 PM
jghaenlein
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
8
08-27-2015 07:07 AM
14lgreer
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
08-21-2015 01:46 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)