2003 4.0 intake removal questions.
#1
Newbie
Thread Starter
Join Date: Jan 2018
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee(SJ)
2003 4.0 intake removal questions.
I am removing the manifold(s) from my 2003 Grand Cherokee w/4.0. I have all the top bolts out, and the one bottom one closest to the middle. Shouldn't I be able to lift off intake manifold now, or is there another bottom side bolt that holds on the intake also?
#2
Old fart with a wrench
You're going to have to remove both manifolds to replace the gasket anyhow, so remove all the bolts except the last one in front and the last in the rear. Re-install a couple of top bolts first to hold the weight of the intake so you don't crack the mounting ears off it.
The following users liked this post:
Brandon Conrad (04-20-2020)
#5
Old fart with a wrench
Remember he's got the split cast iron exhaust manifolds.
#7
Old fart with a wrench
As I stated before, only #6 and #7 ONLY hold the exhaust on. They are studs as well.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Tonyf
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
01-30-2018 09:25 AM
Tonyf
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
01-29-2018 09:19 AM
Tonyf
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
0
01-28-2018 07:50 PM
jeepgldgr
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
5
07-03-2012 02:40 PM
evercold
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
11
03-02-2010 05:15 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)