2000 WJ Steering joints
Thread Starter
Member
Joined: Dec 2010
Posts: 114
Likes: 0
From: East Sussex, UK
Year: 2000
Model: Grand Cherokee
Engine: 4.0 Petrol
2000 WJ Steering joints
Changing all 4 of the tie-rod ends / ball joints on my 2000 WJ - done 3 of them, last one is connected to the pitman arm - just cannot get it to come off !!! Using a heavy duty ball-joint splitter and no go !.
Any tips / advice ???
Any tips / advice ???
Thread Starter
Member
Joined: Dec 2010
Posts: 114
Likes: 0
From: East Sussex, UK
Year: 2000
Model: Grand Cherokee
Engine: 4.0 Petrol
*** SORTED ***
Gave it one last turn on the splitter with a long breaker bar - I swear I could see the splitter starting to flex - and it finally came apart with a BANG !!!
This was the easiest joint to unscrew from the threaded tube by far - all of the other 3 were almost seized...lots of WD-40 and big pipe wrench came in handy.
Thread
Thread Starter
Forum
Replies
Last Post
Rich164
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Sep 8, 2015 08:32 AM
MyJeepIsATyrant
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Sep 4, 2015 10:36 AM
ammonllewis1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
Sep 3, 2015 09:03 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
