1995 Grand Cherokee TQ/Flexplate mismatch
06-02-2015, 07:47 PM
#1
Newbie
Thread Starter
Join Date: Jun 2015
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
1995 Grand Cherokee TQ/Flexplate mismatch
Hello all,
I'm in the process of replacing the 42RE tranny in our 1995 4.0 Grand Cherokee. Reman tranny from AutoZone. The reman torque converter's boltholes do not line up to those on the flexplate. Going circumferally around the flexplate, the distances (center to center) between the four boltholes measure 7", 7", 7" and 7.25". The distances between the boltholes on the reman TQ are all spaced at 7". Unfortunately, both the the tranny and TQ cores have been sent back. Any advice?
Thanks,
Dave
I'm in the process of replacing the 42RE tranny in our 1995 4.0 Grand Cherokee. Reman tranny from AutoZone. The reman torque converter's boltholes do not line up to those on the flexplate. Going circumferally around the flexplate, the distances (center to center) between the four boltholes measure 7", 7", 7" and 7.25". The distances between the boltholes on the reman TQ are all spaced at 7". Unfortunately, both the the tranny and TQ cores have been sent back. Any advice?
Thanks,
Dave
06-03-2015, 07:39 AM
#2
Old fart with a wrench
Yeah, go back to Autozone and tell them to get you the right TC or flexplate. Either way, it's their fault they won't go together.
Last edited by dave1123; 06-03-2015 at 07:41 AM.
06-03-2015, 04:17 PM
#4
Old fart with a wrench
According to that info, the TC they gave you doesn't have lock-up.
Thread
Thread Starter
Forum
Replies
Last Post
lgrant
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
08-27-2015 05:49 AM
Katt Dogg
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
08-25-2015 08:03 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)