Two Door Chop Top
CF Veteran
Joined: Jan 2010
Posts: 1,488
Likes: 0
From: Albuquerque
Year: 1995
Model: Cherokee
Engine: 4.0
looks sweet! the red rollbar looks hot too should paint a little more red on there maybe the bumpers?
looking realy good keep up on it its my favorite build thread!!
looking realy good keep up on it its my favorite build thread!!
Thread Starter
Junior Member
Joined: Sep 2009
Posts: 98
Likes: 0
From: BC Canada
Year: 1990
Model: Cherokee
Engine: 4L
Long time no update, But to answer your questions....
I did not, I rolled the paint on. It is 2 coats and 3 in spots. The paint covered really nice over the black.
Yea so do I. I kinda miss the shark look, but it just wasn't me.
Thanks...
Well I found a set of 3" lift coils so I can finally cut down my 4" coil spacer to a reasonable size again. I also picked up some hood pins seeing as my hood release handle was broken. Finally I picked up a camouflage tarp that I am going to use for a back cover. It is going to come down from the roof on an angle and attach the the tail gate. Hopefully I can get around to installing some of this stuff this weekend and shoot you guys some pics of the work. But in the mean time here is a HDR type picture I did of the truck..

Also when buddy came to get my old rims and drop off the lift coils he wanted to show us how well his jeep flexed so I pulled my Jeep onto the road and he climbed the tire. For being open open he had zero problems. In the pictures he is running stock 235s, and his limiting straps are connected in the rear.


Matt
I did not, I rolled the paint on. It is 2 coats and 3 in spots. The paint covered really nice over the black.
Yea so do I. I kinda miss the shark look, but it just wasn't me.
Thanks...
Well I found a set of 3" lift coils so I can finally cut down my 4" coil spacer to a reasonable size again. I also picked up some hood pins seeing as my hood release handle was broken. Finally I picked up a camouflage tarp that I am going to use for a back cover. It is going to come down from the roof on an angle and attach the the tail gate. Hopefully I can get around to installing some of this stuff this weekend and shoot you guys some pics of the work. But in the mean time here is a HDR type picture I did of the truck..

Also when buddy came to get my old rims and drop off the lift coils he wanted to show us how well his jeep flexed so I pulled my Jeep onto the road and he climbed the tire. For being open open he had zero problems. In the pictures he is running stock 235s, and his limiting straps are connected in the rear.


Matt
CF Veteran
Joined: Aug 2008
Posts: 5,603
Likes: 0
From: Hollidaysburg, PA
Year: 1990
Model: Cherokee
Engine: 4.0 lt. 242 cu.in.
What kind of What kind of paint did you use? What is the texture like? Sorry for all the questions, I was thinking about painting my jeep like that(roll on, not color scheme)
Thread Starter
Junior Member
Joined: Sep 2009
Posts: 98
Likes: 0
From: BC Canada
Year: 1990
Model: Cherokee
Engine: 4L
I used tremclad it's similar to rustolium. I used a foam roller and the finish is smooth and kinda glossy. I bet if you rolled a coat and wet sanded it and rolled another wet sanded again clear coated and buffed you could get a nice smooth finish. I'll try and get so e close up shots for you tomorrow.
CF Veteran
Joined: Oct 2009
Posts: 1,487
Likes: 0
From: Parrish
Year: 1989
Model: Comanche
Engine: 4.0
WOW when you first started this build I was like oh another chop. However this looks amazing. Not something I would do to my 2 door but very cool. I also really like the new paint job.
CF Veteran
Joined: Aug 2008
Posts: 5,603
Likes: 0
From: Hollidaysburg, PA
Year: 1990
Model: Cherokee
Engine: 4.0 lt. 242 cu.in.
I used tremclad it's similar to rustolium. I used a foam roller and the finish is smooth and kinda glossy. I bet if you rolled a coat and wet sanded it and rolled another wet sanded again clear coated and buffed you could get a nice smooth finish. I'll try and get so e close up shots for you tomorrow.
Thread Starter
Junior Member
Joined: Sep 2009
Posts: 98
Likes: 0
From: BC Canada
Year: 1990
Model: Cherokee
Engine: 4L


The top left of the truck is painted with rocker guard first then the green is painted over top.
CF Veteran
Joined: Aug 2008
Posts: 5,603
Likes: 0
From: Hollidaysburg, PA
Year: 1990
Model: Cherokee
Engine: 4.0 lt. 242 cu.in.




