Good progress, can't wait till spring and summer roll in and the progress will increase haha.

Well I got some nice weather. I got the springs and and shocks done on the driver side and the springs done on the passenger side but broke the shock bolts . So I went to Hf and picked up a air chisel and a grade 5 bolt assortment it only took 15 min to fix it and get back on track…

I also picked up at HF 400ft of wire for the lights,cb,radio,power inverter and a few other things. Then I slid up the road to a truck stop and grabbed a new CB whip antenna and some mounts to try.

Well I got some painting done. I got the hood, fenders, and doors done Im using rustoleum industrial gloss with a high density 4in foam roller. I also got the new tires and wheels on. My wife wants all these parts and stuff out of the living room

I got the snorkal started..

Then in the afternoon it warmed up a bit so the kids and I finished up painting..

Then the next day a light bulb above my head went off and I decided to put some on the jeep.

After the lights I got the cb hoocked up and the old radio pulled out.

Then melissa and I started stripping that nasty bedliner off the floor.. I swear we found swiss cheese under that crap…. Looks like a new floor in the near future.

Well then I took a break from that and let melissa strip for awhile and I pulled the panel off the back hatch.

Iv got allot started but little finished and keeping with that my new power steering pump come in so I had to pull the old one for the core... But I'm hoping to get then new one mounted to day.. While I'm at it I will change the belt -- plugs--wires--dist cap. while works on more stripping of the floor.... Will update again tonight...... I still have tons to do.

good build

Thanks.. I wish this weather would warm up.. Then I can get allot more done.

Same here

I will never deal with auto zone again.... NEVER EVER..... Well I got my power steering pump picked up and I was so I couldn't take it... Anyway then I went to advanced auto and bought my other parts and spent about $140 and it was a completely diffrint experence I will spend my money at advanced from now on....

I managed to get the power steering pump and new line on. Then I changed the plugs/wires/dist cap/rotor button/new belt. I also cut out all those heater hoses that were Jerry rigged so I could redo them and get them out of my way..

Lots of progress. Good build