REWSTER's 00XJ build
Thread Starter
CF Veteran
Joined: Sep 2008
Posts: 2,418
Likes: 0
From: HAMMOND IN
Year: 2000
Model: Cherokee
Engine: 4.0
getting ready for some 33's when my 30's wear down a bit more probably after the snow starts hitting us here
so i got the fenders trimmed here are the pics


i am also gonna get some of that cheep bed-liner from walmart to cover the lower body (like everyone does) and cover the exposed metal on the rear trim
so i got the fenders trimmed here are the pics


i am also gonna get some of that cheep bed-liner from walmart to cover the lower body (like everyone does) and cover the exposed metal on the rear trim
Junior Member
Joined: Jul 2010
Posts: 73
Likes: 0
From: Wisconsin
Year: 2000
Model: Cherokee
Engine: 4.0
Very nice man props on green xjs!!!! I have a 2000 that i am slowly building I bought it with 5.5 inches or so of homebrew lift and and swapping it for * inch iron rock coils and leafs and making some long arms and all that jazz. You can check it out if you want the link is in my sig!!!
Thread Starter
CF Veteran
Joined: Sep 2008
Posts: 2,418
Likes: 0
From: HAMMOND IN
Year: 2000
Model: Cherokee
Engine: 4.0
little update with out pics
picked up a set of 15x8x4bs d window wheels up last week end set of 4 for a hundo
then Wednesday i got some used 32x11.50's mud kings with little tread left for free
im not sure if im gonna run the tires because my 30's have more tread than them but they will make good enough spares when i bump up to the 33's
picked up a set of 15x8x4bs d window wheels up last week end set of 4 for a hundo
then Wednesday i got some used 32x11.50's mud kings with little tread left for free
im not sure if im gonna run the tires because my 30's have more tread than them but they will make good enough spares when i bump up to the 33's
Junior Member
Joined: Sep 2009
Posts: 90
Likes: 2
From: Bristol, TN
Year: 1995
Model: Cherokee
Engine: 4.0
I have been thinking about doing a 3" lift on my '95 but not too sure how it would look, thanks for the great follow through on your build and posting before and after pics. Your XJ is something sweet!!
Thread Starter
CF Veteran
Joined: Sep 2008
Posts: 2,418
Likes: 0
From: HAMMOND IN
Year: 2000
Model: Cherokee
Engine: 4.0
i think they should have came from the factory at the height of a 3" lift
thanks for the nice words

im dieing to get them but i keep putting it on hold to get bills payed
im so temped to put these 32's on it
Thread Starter
CF Veteran
Joined: Sep 2008
Posts: 2,418
Likes: 0
From: HAMMOND IN
Year: 2000
Model: Cherokee
Engine: 4.0
So i put the 32's on the D window wheels and got them on the rig....
it looks boss....
pics are on my phone so as soon as i get them off of there and on the internet i will post them
it looks boss....
pics are on my phone so as soon as i get them off of there and on the internet i will post them
Thread Starter
CF Veteran
Joined: Sep 2008
Posts: 2,418
Likes: 0
From: HAMMOND IN
Year: 2000
Model: Cherokee
Engine: 4.0
here ya go 




i like the new wider stance


some work wheelin shots



sorry for the crapy cell pics my camera was messed up and i didnt buy a new one yet





i like the new wider stance


some work wheelin shots



sorry for the crapy cell pics my camera was messed up and i didnt buy a new one yet


