View Poll Results: i got KC daylighter lights. where should i mount them? i like the top, bf says bumper
Voters: 16. You may not vote on this poll
Project Mommy-mobile
Thread Starter
Member
Joined: Sep 2012
Posts: 219
Likes: 0
From: Mulliken, MI
Year: 1998
Model: Cherokee
Engine: 4.0
Most undercoating won't last long here. Yeah Por-15 is pretty good. I am going to use chassis saver on my underbody I think. I kinda like Dupli-colors bedliner. I did it on my rear bumper and it is holding up good. I need to fold over my fenders also, and the rear quarters. You going to drive his for a DD in the winter?
Junior Member
Joined: Jul 2013
Posts: 47
Likes: 0
From: Michigan
Year: 1999
Model: Cherokee
Engine: 4.0L
Yeah I have to replace some floor panels and then I am going to coat everything I can. Yeah Insurance is high here. No-Fault state. lol. Yeah if ya wash it at least one a week in the winter you should be good.
Member
Joined: Jun 2013
Posts: 119
Likes: 1
From: CT
Year: 1998
Model: Cherokee
Engine: 4.0 straight six
I have the same jeep, it's a little more used, but a badass jeep nonetheless. Glad to see that there are more mean green jeeps like mine out there. How many miles?
CF Veteran
Joined: Feb 2013
Posts: 1,286
Likes: 2
From: Belton S.C.
Year: 1998
Model: Cherokee
Engine: 4.0
Thread Starter
Member
Joined: Sep 2012
Posts: 219
Likes: 0
From: Mulliken, MI
Year: 1998
Model: Cherokee
Engine: 4.0
. Theres a green jeeps club on here somewhere just look it up and go join
. And mine has 209xxx on the body and about 100xxx on the motor. (According to the PO the motor and was replaced and had about 90xxx when i got it)
Thread Starter
Member
Joined: Sep 2012
Posts: 219
Likes: 0
From: Mulliken, MI
Year: 1998
Model: Cherokee
Engine: 4.0
Took the fenders off so i can fully undercoat the back sides and some parts of the body. Shes naked
lol


I took it off and reassembled and thought hey it'd be cool to find one at a junkyard and hang up in the garage and put led lights in it lol...just a thought.

While having the header panel off i decided to do something but not saying until i can post pics
Well thats it yall, stay tuned!
lol

I took it off and reassembled and thought hey it'd be cool to find one at a junkyard and hang up in the garage and put led lights in it lol...just a thought.

While having the header panel off i decided to do something but not saying until i can post pics

Well thats it yall, stay tuned!
Thread Starter
Member
Joined: Sep 2012
Posts: 219
Likes: 0
From: Mulliken, MI
Year: 1998
Model: Cherokee
Engine: 4.0
Thread Starter
Member
Joined: Sep 2012
Posts: 219
Likes: 0
From: Mulliken, MI
Year: 1998
Model: Cherokee
Engine: 4.0
(Although to fit my xj in the garage I've gotta take my roof rack off lol)
Junior Member
Joined: Jul 2013
Posts: 47
Likes: 0
From: Michigan
Year: 1999
Model: Cherokee
Engine: 4.0L
Yeah that's my problem, that green stuff that does NOT grow on trees!! LOL.
I only have 1.5" lift and it barely fits in garage. Do need to get a bunch done before winter though..
I only have 1.5" lift and it barely fits in garage. Do need to get a bunch done before winter though..
Thread Starter
Member
Joined: Sep 2012
Posts: 219
Likes: 0
From: Mulliken, MI
Year: 1998
Model: Cherokee
Engine: 4.0
Well if i could be of any help let me know, i can't see your location since I'm using the app, but I'm just outside of Lansing.
Thread Starter
Member
Joined: Sep 2012
Posts: 219
Likes: 0
From: Mulliken, MI
Year: 1998
Model: Cherokee
Engine: 4.0
Before

After

Behind the fender

At the bottom of the fender. I did the cuz the PO riveted a thick piece of metal to the rockers, so to prevent rust i undercoated that part. Guess i need to take that metal off and do underneath of it so it doesn't rust my rockers out.

Currently waiting to get a couple of cans of undercoating to finish up. Next on the list hopefully will be gears. Just doing small stuff here and there for the time being...

After

Behind the fender

At the bottom of the fender. I did the cuz the PO riveted a thick piece of metal to the rockers, so to prevent rust i undercoated that part. Guess i need to take that metal off and do underneath of it so it doesn't rust my rockers out.

Currently waiting to get a couple of cans of undercoating to finish up. Next on the list hopefully will be gears. Just doing small stuff here and there for the time being...











