Irongrave

Finally got a chance to do a little more work on it this summer. She was interning at GE in Eire PA for the summer so I didn't get my paws on it untill this weekend.

Got a new exhaust from the manifold back including a brand new cat under warranty by a dealer in Melbourne Fl this spring.

We just finished installing a Zone 2in aal out back with their black shocks along with new shocks and sway bar bushings up front. it sits a little nose down right now but when she loads it full of college/apt stuff to go back to school its no longer riding on the bump stops. I'll put the front spacers in at some point to level it out. We also picked up a rack from a fellow jeep club member who no longer wanted it.

Taken on our way from Florida to NY this spring

At home in my drive way with the YJ buggy, my sisters WK1 and GFs XJ

now with the rear lift and rack

Irongrave

well it looked like the end was near for project low on green. rusted floors, broken upper rear shock bolt and a nice list of small things and we debated trading it in on a new impreza 5 door. Well we got the Subaru but kept the XJ. Seems like this XJ has 9 lives she'll once again go into the shop for a better mid life overhall/rebuild. once finished She'll turn into my daily commuter/around town rig to keep miles off the hemi. As the XJ has been getting 14-16city and the dodge is only getting 12-13.

Xj88

Chop it up, tube it out, and turn it into a trail machine!

Irongrave

that what the YJ is for. Though part of me dose want to fit the 33x13.5 pitbulls with a 2in lift to see what it looks like

Irongrave

I started laying out all the parts that will be going into the rig. Have a set of tow hook brackets with some old Hi Country D-ring mounts I had on my old XJ and set of sway bar disconnects. the front spacers are still in NY but I'll be getting the YJ and the rest of the parts this coming weekend.

bhennessee1

That would be bad assssssd

Irongrave

finally have all my tools and the rest of the parts for the XJ out here. going to do the seats tomorrow and maybe the front spacers.

Irongrave

Seats and spacers done. tow hook brackets tomorrow along with photos and maybe test fitting the pitbulls for the hell of it.

Irongrave

I got the front d-ring mounts and tow hook brackets installed today and test fit one of my 33s.

Seats


all finished up and out of the shop






the 33x13.5 pitbull it fit but could never drive with the fenders stock. either needs some good cutting or flat flairs if I ever decided to run 33s on 2 inches of lift height.

JacksonUrbom

1004519_10200538483010156_832409028_n