Project Less is more 96 ZJ
Thread Starter
Seasoned Member
Joined: Oct 2010
Posts: 458
Likes: 4
From: Jville, NC / Troy, NC
Model: Grand Cherokee
Engine: 4.0
Got a bit done tonight before I ran out of wire. The tie rod is done and welded up just need to cut and weld up the drag link. The track bar bracket is in and welded up as well.
CF Veteran
Joined: Sep 2010
Posts: 1,649
Likes: 1
From: Springville, UT
Year: 1993
Model: Grand Cherokee
Engine: 5.2 V8, Dual cold air, dual batts, E-fan, Sanden OBA
Any plans to reinforce that TB bracket or run a crossbar? Its comin together nicely! Get some wire and finish her up
Thread Starter
Seasoned Member
Joined: Oct 2010
Posts: 458
Likes: 4
From: Jville, NC / Troy, NC
Model: Grand Cherokee
Engine: 4.0
Got a ton done tonight!!!
Winch is mounted up
steering is done
front axle is centered
drive shafts are in and tightened up.
Rear dif is filled
Just a few things left to do tomorrow night and we are going wheeling Sunday!!
Winch is mounted up
steering is done
front axle is centered
drive shafts are in and tightened up.
Rear dif is filled
Just a few things left to do tomorrow night and we are going wheeling Sunday!!
Thread Starter
Seasoned Member
Joined: Oct 2010
Posts: 458
Likes: 4
From: Jville, NC / Troy, NC
Model: Grand Cherokee
Engine: 4.0
she is alive!!!
got the brakes bleed and all the steering finished up just need to weld in my new rear upper shock mounts tomorrow. I would have done it tonight but the liner in my welder got messed up somehow. ill borrow my neighbors welder in the am and finish it up.
got the brakes bleed and all the steering finished up just need to weld in my new rear upper shock mounts tomorrow. I would have done it tonight but the liner in my welder got messed up somehow. ill borrow my neighbors welder in the am and finish it up.
Thread Starter
Seasoned Member
Joined: Oct 2010
Posts: 458
Likes: 4
From: Jville, NC / Troy, NC
Model: Grand Cherokee
Engine: 4.0
Just bleed the power steering out and drove it down the road for the first time!!! It drives amazing!!! No steering stabilizer needed!
And here is my jeep next to my dads!
And here is my jeep next to my dads!
CF Veteran
Joined: Sep 2010
Posts: 1,649
Likes: 1
From: Springville, UT
Year: 1993
Model: Grand Cherokee
Engine: 5.2 V8, Dual cold air, dual batts, E-fan, Sanden OBA
Try limiting the rear alot more, looks like its unloading before the front gets a chance to compress.
Senior Member
Joined: Aug 2010
Posts: 893
Likes: 0
Model: Cherokee
I did get them from him.
Well I have a buddy parting out his grand and Im getting the cage, F/R bumpers for $500 Should have them in 3 weeks for so!!
Here is the cage. I will be putting an X in the main hoop and a harness bar. I plan to modify it a tad to fit me since I am after all 6'8 lol
Here is the front bumper. I will be picking up an engo 9000 lb winch for it eventually.
Well I have a buddy parting out his grand and Im getting the cage, F/R bumpers for $500 Should have them in 3 weeks for so!!
Here is the cage. I will be putting an X in the main hoop and a harness bar. I plan to modify it a tad to fit me since I am after all 6'8 lol
Here is the front bumper. I will be picking up an engo 9000 lb winch for it eventually.
