Project: Keepin' it clean
Junior Member
Joined: Oct 2012
Posts: 77
Likes: 0
From: Sagle Idaho
Year: 1994
Model: Cherokee
Engine: Staright 6 High ouput
Senior Member
Joined: Nov 2011
Posts: 928
Likes: 0
From: Manhattan, Kansas
Year: 1997
Model: Cherokee
Engine: 4.0L
It's in June, so if I can lift my Jeep a bit more and sort out my bumpstops by then... I will most likely be there. 
Okay.. I've been trying to think of a way to put a winch on the front of my XJ for a loooonnnnngggg time...
Here's what I came up with at 3am when I was having trouble falling asleep.. Kinda hit me like a lead brick.
(please ignore my horrible drawing skills..)
Now that I look at it, my design would have to be changed slightly because of the LED bar.. Basically putting the winch like an inch (or maybe closer) in front of the LED bar (sticking slightly past the end of the bullbar) and mounting slightly differently to how I drew it and make it sit as low to the top of the 2" receiver as possible... I'm probably going to try and play around with my winch this weekend and see how I can set it in there (to see how it looks).
And I was looking at some old pics.. My springs have definitely sagged.....
summertime lift height...
Lift height as of a few weeks ago... Looks about an inch, or so, lower to me..
Okay.. I've been trying to think of a way to put a winch on the front of my XJ for a loooonnnnngggg time...
Here's what I came up with at 3am when I was having trouble falling asleep.. Kinda hit me like a lead brick.
(please ignore my horrible drawing skills..)Now that I look at it, my design would have to be changed slightly because of the LED bar.. Basically putting the winch like an inch (or maybe closer) in front of the LED bar (sticking slightly past the end of the bullbar) and mounting slightly differently to how I drew it and make it sit as low to the top of the 2" receiver as possible... I'm probably going to try and play around with my winch this weekend and see how I can set it in there (to see how it looks).
And I was looking at some old pics.. My springs have definitely sagged.....
summertime lift height...
Lift height as of a few weeks ago... Looks about an inch, or so, lower to me..
Thread Starter
Senior Member
Joined: Nov 2011
Posts: 795
Likes: 0
From: Snowville, PA
Year: 1998
Model: Cherokee
Engine: 4.0 I6 torque monster w/ a supercharger
And he hooked to the axles.
Thread Starter
Senior Member
Joined: Nov 2011
Posts: 795
Likes: 0
From: Snowville, PA
Year: 1998
Model: Cherokee
Engine: 4.0 I6 torque monster w/ a supercharger
That's mah plan. 
I usually stick to the greens and blues. I don't quite have enough bumpstop to keep the tires out of the flares yet so I've been taking it easy.. Gunna do hockey pucks in the front and a bump pad on top of the leafs for the rear. I've been taking it easy the few times I've been to Rausch also because I was building the Jeep at the time and didn't want to break anything and I also had open diffs every time I went wheeling. But I have some axle goodies to install come summertime.
I have, on occasion, been known to mash the gas while wheeling though... And now that I have a way to shift the AW4 manually, it's gunna be FUN cause now I can bounce off the rev limiter!!
You should've seen when I was coming out of Crawl Daddy after I took this video (unfortunately i didn't record it). It was pedal-to-the-metal the entire way up. 
(crawl daddy is a red trail btw...)
I have, on occasion, been known to mash the gas while wheeling though... And now that I have a way to shift the AW4 manually, it's gunna be FUN cause now I can bounce off the rev limiter!!
You should've seen when I was coming out of Crawl Daddy after I took this video (unfortunately i didn't record it). It was pedal-to-the-metal the entire way up. (crawl daddy is a red trail btw...)Last edited by bpas328xi; Mar 18, 2013 at 05:33 PM.
Thread Starter
Senior Member
Joined: Nov 2011
Posts: 795
Likes: 0
From: Snowville, PA
Year: 1998
Model: Cherokee
Engine: 4.0 I6 torque monster w/ a supercharger
Here's a write-up that I'm probably going to follow.. It's for a 2nd gen though. Sorry.
https://www.cherokeeforum.com/f46/my...x4/#post994812
Senior Member
Joined: Nov 2012
Posts: 523
Likes: 0
From: Plymouth CT
Year: 1988
Model: Cherokee
Engine: 4.0L
Dude. You have no idea how much I'm dying to go wheeling. Lmao.
Here's a write-up that I'm probably going to follow.. It's for a 2nd gen though. Sorry.
https://www.cherokeeforum.com/f46/my...x4/#post994812
Here's a write-up that I'm probably going to follow.. It's for a 2nd gen though. Sorry.
https://www.cherokeeforum.com/f46/my...x4/#post994812
I havent been since this january.
Overheated. Stuck. Loving it.
I may be able to talk to motorcharge on here
Thread Starter
Senior Member
Joined: Nov 2011
Posts: 795
Likes: 0
From: Snowville, PA
Year: 1998
Model: Cherokee
Engine: 4.0 I6 torque monster w/ a supercharger
But she was like that before the supercharger. Lol. You mean this dude?? https://www.cherokeeforum.com/f46/pr...charge-144625/ Lol. DO ETT!!!!!
Senior Member
Joined: Nov 2012
Posts: 523
Likes: 0
From: Plymouth CT
Year: 1988
Model: Cherokee
Engine: 4.0L
Yeah... Mine doesn't overheat when I wheel.. She just gets a little...toasty. But she was like that before the supercharger. Lol.
You mean this dude?? https://www.cherokeeforum.com/f46/pr...charge-144625/ Lol. DO ETT!!!!!
But she was like that before the supercharger. Lol. You mean this dude?? https://www.cherokeeforum.com/f46/pr...charge-144625/ Lol. DO ETT!!!!!
Mine is eh. Need to finish my fans. Doing the dual fan mod
Thread Starter
Senior Member
Joined: Nov 2011
Posts: 795
Likes: 0
From: Snowville, PA
Year: 1998
Model: Cherokee
Engine: 4.0 I6 torque monster w/ a supercharger
Senior Member
Joined: Nov 2012
Posts: 523
Likes: 0
From: Plymouth CT
Year: 1988
Model: Cherokee
Engine: 4.0L
Thread Starter
Senior Member
Joined: Nov 2011
Posts: 795
Likes: 0
From: Snowville, PA
Year: 1998
Model: Cherokee
Engine: 4.0 I6 torque monster w/ a supercharger
Bleh. It's a lifted brick with big tires (and a supercharger in my case)... Mileage is gunna suck no matter what. Lol.
Looks like I might be getting an unpainted and uninstalled Orvis spoiler for my XJ... I've only been looking for one for how long?!? Lmao.
Here's what the spoiler looks like mounted. It also has an LED 3rd brake light which makes me happy. Not sure if I want to paint it red or satin black... Kinda leaning towards satin black.
Looks like I might be getting an unpainted and uninstalled Orvis spoiler for my XJ... I've only been looking for one for how long?!? Lmao.
Here's what the spoiler looks like mounted. It also has an LED 3rd brake light which makes me happy.
Not sure if I want to paint it red or satin black... Kinda leaning towards satin black. 
Last edited by bpas328xi; Mar 18, 2013 at 09:30 PM.
Thread Starter
Senior Member
Joined: Nov 2011
Posts: 795
Likes: 0
From: Snowville, PA
Year: 1998
Model: Cherokee
Engine: 4.0 I6 torque monster w/ a supercharger
