Project Ironside
Thread Starter
Seasoned Member
Joined: Dec 2016
Posts: 307
Likes: 0
From: Cranston, Rhode Island/Swansea, Massachusetts
Year: 1999/1995
Model: Cherokee (XJ)
Engine: 4.0L
CF Veteran
Joined: Jun 2016
Posts: 2,929
Likes: 5
From: York PA
Year: 2001
Model: Cherokee
Engine: 4.0 Litre I6
So here's a list of what I'm going to be doing on the jeep Cherokee as of rn in no particular order:
1.Put on mirrors.
2. Swap out front fenders.
3.swap out header panel
1.Put on mirrors.
2. Swap out front fenders.
3.swap out header panel
4.remove the damn stickers
5.Replace drivers rear outside doorhandle
6.put full quiet exhaust on
7.replace windshield 8.install second fusebox9.install 12 lights
10.repair/replace floor
11.find and buy and replace sunroof lock
12.paint/primer/sand/rustproof 13.Change oil/filter/radiator coolant/transmission fluid/gear oil/spark plugs/brakes
14.have a party to celebrate the jeep
15.buy new 32" tires
16.install some sort of radio
17.repair running board brackets
18.test drive
19.have an even bigger party.
I think that covers everything rn.
5.Replace drivers rear outside doorhandle
6.put full quiet exhaust on
7.replace windshield 8.install second fusebox9.install 12 lights
10.repair/replace floor
11.find and buy and replace sunroof lock
12.paint/primer/sand/rustproof 13.Change oil/filter/radiator coolant/transmission fluid/gear oil/spark plugs/brakes
14.have a party to celebrate the jeep
15.buy new 32" tires
16.install some sort of radio
17.repair running board brackets
18.test drive
19.have an even bigger party.
I think that covers everything rn.
21.Lockers
just a suggestion buddy, but really, do what makes you happy.
Thread Starter
Seasoned Member
Joined: Dec 2016
Posts: 307
Likes: 0
From: Cranston, Rhode Island/Swansea, Massachusetts
Year: 1999/1995
Model: Cherokee (XJ)
Engine: 4.0L
CF Veteran
Joined: Feb 2016
Posts: 3,683
Likes: 8
From: Northern New Mexico
Year: 1999
Model: Cherokee
Engine: 4.0
nice man 3 sounds alot better haha. One on bumper, some on back for reversing, and if you want some pods on the side. You can only see so far anyway.more lights don't help haha. You have a 20 inch bar on the bumper, having a 50 inch on the roof or something increase vision by a small percentage
Thread Starter
Seasoned Member
Joined: Dec 2016
Posts: 307
Likes: 0
From: Cranston, Rhode Island/Swansea, Massachusetts
Year: 1999/1995
Model: Cherokee (XJ)
Engine: 4.0L
3.73 isn't much better then stock...depending on tire size either 4.10s or 4.56 gears are the way to go.
nice man 3 sounds alot better haha. One on bumper, some on back for reversing, and if you want some pods on the side. You can only see so far anyway.more lights don't help haha. You have a 20 inch bar on the bumper, having a 50 inch on the roof or something increase vision by a small percentage
nice man 3 sounds alot better haha. One on bumper, some on back for reversing, and if you want some pods on the side. You can only see so far anyway.more lights don't help haha. You have a 20 inch bar on the bumper, having a 50 inch on the roof or something increase vision by a small percentage
CF Veteran
Joined: Feb 2016
Posts: 3,683
Likes: 8
From: Northern New Mexico
Year: 1999
Model: Cherokee
Engine: 4.0
Did you ever figure out if you had 3:55s? More then likely do so 3:73 isn't a big step up.
Thread Starter
Seasoned Member
Joined: Dec 2016
Posts: 307
Likes: 0
From: Cranston, Rhode Island/Swansea, Massachusetts
Year: 1999/1995
Model: Cherokee (XJ)
Engine: 4.0L
Thread Starter
Seasoned Member
Joined: Dec 2016
Posts: 307
Likes: 0
From: Cranston, Rhode Island/Swansea, Massachusetts
Year: 1999/1995
Model: Cherokee (XJ)
Engine: 4.0L
So I was reading the Cherokee manual cause I had it in front of me (thanks to my dad bringing it home so I could read/use it) and it didn't mention header panel removal and also the fender removal steps. I asked him (my dad) and he says it's similar to how the grand Cherokee fenders are in terms of removing them. He also said that I'm going to have a really hard time with the header panel, so once again I'm wondering just what am I getting myself into with this lol
Thread Starter
Seasoned Member
Joined: Dec 2016
Posts: 307
Likes: 0
From: Cranston, Rhode Island/Swansea, Massachusetts
Year: 1999/1995
Model: Cherokee (XJ)
Engine: 4.0L
CF Veteran
Joined: Feb 2016
Posts: 3,683
Likes: 8
From: Northern New Mexico
Year: 1999
Model: Cherokee
Engine: 4.0
Thread Starter
Seasoned Member
Joined: Dec 2016
Posts: 307
Likes: 0
From: Cranston, Rhode Island/Swansea, Massachusetts
Year: 1999/1995
Model: Cherokee (XJ)
Engine: 4.0L



And also maybe some ridiculous 44's