Project: #Goldnugget - The 3rd build.
#31
Junior Member
Thread Starter
Little bit of this, little bit of that.
WF Fab is making it look good.
Got the hip bar in. Will likely add a tube from the hip bar to the A-pillar so I can put some skins on it.
Got the B-pillar X in.
Started forming the rear of the roof.
Pretty badass rear roofline if I do say so myself.
Some sweet notches.
Adding gussets where necessary and finishing out the roof next, I believe.
Then we have to figure out what to do about a fuel system. I'd like to use the OEM tank recessed in the rear floor but I'm not sure there's enough room for that anymore.
More to come.
WF Fab is making it look good.
Got the hip bar in. Will likely add a tube from the hip bar to the A-pillar so I can put some skins on it.
Got the B-pillar X in.
Started forming the rear of the roof.
Pretty badass rear roofline if I do say so myself.
Some sweet notches.
Adding gussets where necessary and finishing out the roof next, I believe.
Then we have to figure out what to do about a fuel system. I'd like to use the OEM tank recessed in the rear floor but I'm not sure there's enough room for that anymore.
More to come.
#32
Junior Member
Thread Starter
I guess tube doesn't excite Ole' CherocarForum. lol
Better side views.
Added some gussets here and there.
Better side views.
Added some gussets here and there.
#36
Junior Member
Thread Starter
Going to use a late model fuel pump and returnless fuel rail.
I'll have to make an adapter ring and draw up a custom mount for the cell.
#37
Junior Member
Thread Starter
Also, builds get no love because I don't have a light bar yet.
It'll get love once the axles get slid under the Jeep.
It'll get love once the axles get slid under the Jeep.
#39
Junior Member
Thread Starter
#41
Junior Member
Thread Starter
#45
Junior Member
Thread Starter
Looks like we'll have to cut into the floor to make the rear seat sit flat enough for an adult to sit in it.