Jeep Builds Make your own jeep build thread here, discuss and view jeeps here. All Jeep models are welcome here.
Sponsored by:
Sponsored by:

Project - "Finally Ours"

Old Jul 5, 2011 | 09:02 PM
  #1  
mcguyver_xj's Avatar
Thread Starter
Banned
 
Joined: Oct 2009
Posts: 2,231
Likes: 1
From: West Springfield, MA
Year: 1999
Model: Cherokee
Engine: 4.0
Default Project - "Finally Ours"

So after having to get rid of my old Cherokee: (3" Rusty's OR-Fab front and rear bumpers 31" tires and lots of structural rust)


My Girlfriend and I decided to get a Cherokee that would be ours and after MANY plans and fallouts and searching we finally found this (pic taken where we picked it up):


It's a 1999 Cherokee Sport 4.0, aw4, np242, hp30, 8.25, pw, pl, pm, cruise...and 206,000 with a cylinder 6 misfire and evap leak and needing front end work and brakes...$750 then another $150 for a friends friend w/ a trailer...oh and it's red like we always wanted my old one to be...

Last edited by mcguyver_xj; Feb 27, 2012 at 08:24 PM.
Reply
Old Jul 5, 2011 | 09:05 PM
  #2  
mcguyver_xj's Avatar
Thread Starter
Banned
 
Joined: Oct 2009
Posts: 2,231
Likes: 1
From: West Springfield, MA
Year: 1999
Model: Cherokee
Engine: 4.0
Default

So we get her home a week after we look at her and first things first flares off and side moldings:



Then semi-moldy carpet out:

Reply
Old Jul 5, 2011 | 09:10 PM
  #3  
mcguyver_xj's Avatar
Thread Starter
Banned
 
Joined: Oct 2009
Posts: 2,231
Likes: 1
From: West Springfield, MA
Year: 1999
Model: Cherokee
Engine: 4.0
Default

Then we took the super crusty front bumper off:


then took rear off and discovered the only real rust on the jeep (other than surface on rockers, passenger doors, and above windshield) on the lower quarters but we are going to cut and fold them anyways...and we put on the OR-Fab rear bumper (i sold the front to my friend since i wasn't a huge fan of it):
Reply
Old Jul 5, 2011 | 09:20 PM
  #4  
mcguyver_xj's Avatar
Thread Starter
Banned
 
Joined: Oct 2009
Posts: 2,231
Likes: 1
From: West Springfield, MA
Year: 1999
Model: Cherokee
Engine: 4.0
Default

So for now we are going to do maintenance which we started on: tune-up, battery, wheel bearings, brakes, etc... But plans include 4.5" Rusty's Offroad lift kit with their long-arms with 33x12.5x15 BFGoodrich KM2's on 15x10 Soft 8's which will be painted gray...
Reply
Old Jul 5, 2011 | 10:42 PM
  #5  
xj715's Avatar
Senior Member
15 Year Member
 
Joined: Dec 2009
Posts: 634
Likes: 0
Default

How was taking the carpet out of the XJ? Mine has been horribly stained every since I purchased the XJ, and I feel like it's time to retire it. Before starting though I've gotta make sure I can replace it with something cheap
Reply
Old Jul 5, 2011 | 10:42 PM
  #6  
stealthcherokee's Avatar
Seasoned Member
 
Joined: Jun 2010
Posts: 456
Likes: 0
From: Agawam, Ma
Year: 1997
Model: Cherokee
Engine: 4.0
Default

i love that front bumper on my jeep wonder who i got it from haha you should do black rims tho itll match the rear bumper future marker lights better to bad you dont have a pic of how bad your front bumper was i never seen one that rusted
Reply
Old Jul 6, 2011 | 12:11 AM
  #7  
mcguyver_xj's Avatar
Thread Starter
Banned
 
Joined: Oct 2009
Posts: 2,231
Likes: 1
From: West Springfield, MA
Year: 1999
Model: Cherokee
Engine: 4.0
Default

chad it was really easy just pull the front seats and center console rip that section out then pull the rear section cut it behind the rear seat and pull those halves seperately...and stealth gray will look good i promise you it will give some contrast to the red and black thing just think imagine it...
Reply
Old Jul 6, 2011 | 12:31 AM
  #8  
xj715's Avatar
Senior Member
15 Year Member
 
Joined: Dec 2009
Posts: 634
Likes: 0
Default

Sweet, i'll probably take a shot at it eventually. Now, time to find new carpet!
Reply
Old Jul 6, 2011 | 07:39 PM
  #9  
mcguyver_xj's Avatar
Thread Starter
Banned
 
Joined: Oct 2009
Posts: 2,231
Likes: 1
From: West Springfield, MA
Year: 1999
Model: Cherokee
Engine: 4.0
Default

Didn't do much today tried installing the new coil as it would not start after new tune-up and spark test showed a weak spark (orange should blue) but couldn't remember where which ground wires went where on the bracket...anyone got a pic?

hopefully tomorrow it will start then i can jack up the front end and see what we need.
Reply
Old Jul 7, 2011 | 11:16 AM
  #10  
XJ BoSS's Avatar
CF Veteran
 
Joined: Jun 2011
Posts: 4,618
Likes: 0
From: Alabama
Year: 1996
Model: Cherokee
Engine: I6
Default

i love that color, wish you woulda kept the flares lol, i think that was jeeps best decision to paint them the same as jeep,
Reply
Old Jul 7, 2011 | 09:38 PM
  #11  
mcguyver_xj's Avatar
Thread Starter
Banned
 
Joined: Oct 2009
Posts: 2,231
Likes: 1
From: West Springfield, MA
Year: 1999
Model: Cherokee
Engine: 4.0
Default

thanks Rhutchinson....got quoted for my lift today even though it will be a couple months before its ordered but looking at just short of $1800 for 4.5" coils and leafs, shocks, steering stabilizer, stainless braided extension lines front and rear, hd trac-bar and bracket, and long arm set-up with shipping of over 300 lbs.
Reply
Old Jul 9, 2011 | 09:48 PM
  #12  
mcguyver_xj's Avatar
Thread Starter
Banned
 
Joined: Oct 2009
Posts: 2,231
Likes: 1
From: West Springfield, MA
Year: 1999
Model: Cherokee
Engine: 4.0
Default

hopefully sometime tomorrow can get a battery in it and see if it starts might need new cables and terminals then to start on front and and back brakes...
Reply
Old Jul 10, 2011 | 05:54 PM
  #13  
mcguyver_xj's Avatar
Thread Starter
Banned
 
Joined: Oct 2009
Posts: 2,231
Likes: 1
From: West Springfield, MA
Year: 1999
Model: Cherokee
Engine: 4.0
Default

finally got it running after charging my battery and cleaning the excess of gas out the cylinders...work commences this week
Reply
Old Jul 13, 2011 | 07:37 PM
  #14  
stealthcherokee's Avatar
Seasoned Member
 
Joined: Jun 2010
Posts: 456
Likes: 0
From: Agawam, Ma
Year: 1997
Model: Cherokee
Engine: 4.0
Default

so any updates?
Reply
Old Jul 14, 2011 | 05:24 AM
  #15  
mcguyver_xj's Avatar
Thread Starter
Banned
 
Joined: Oct 2009
Posts: 2,231
Likes: 1
From: West Springfield, MA
Year: 1999
Model: Cherokee
Engine: 4.0
Default

Originally Posted by stealthcherokee
so any updates?
not yet wating on word about the parts cherokee and then i am going to start soon on the rear brakes, front wheel bearings, sanding down floor and above windshield, removing adhesive from doors...etc...
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:07 AM.