Project Blackout
#16
Junior Member
Join Date: Oct 2009
Location: Lancaster, PA
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0 inline 6
for painting the chrome pieces and the headlight bezle how did you get that top chrome piece off above the grille or did you just tape it off for paint
#17
Junior Member
Thread Starter
Join Date: Dec 2009
Location: Slapout, AL
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0L high output
I love em! Im running 13 psi right now and they look just like 25. Ten even looks fine to drive down the road. The only thing ive found is they are horrible on wet grass. They just spin on top but if it digs any its OVER!
#18
Junior Member
Thread Starter
Join Date: Dec 2009
Location: Slapout, AL
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0L high output
#19
Senior Member
Join Date: Jan 2010
Location: South Louisiana
Posts: 846
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0
yeah i've heard that about wet grass! those lugs can't bite down...what about mud or rocks?
#20
Member
Join Date: Jan 2010
Location: Enterprise, AL
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0I6
do you have the universal coil spacers under the coil springs double stacked? the picture looks like the bottom one is split?
#21
Junior Member
Thread Starter
Join Date: Dec 2009
Location: Slapout, AL
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0L high output
#22
Junior Member
Thread Starter
Join Date: Dec 2009
Location: Slapout, AL
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0L high output
I have one under and one wound through the bottom for the time being. They are split so you can wind them inside the spring. Ima make some out of pipe that the spring will sit down in. Great idea i got from a friend.
#23
Junior Member
Thread Starter
Join Date: Dec 2009
Location: Slapout, AL
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0L high output
Just got done adding some kc daylighters to the stock holes that held the fog lights. Used the stock relay and switch but blew a fuse. Now I gotta locate this little booger. Anybody got a clue where it is. Fuse box? inline?
new pics will be up later on today...
new pics will be up later on today...
#24
Junior Member
Thread Starter
Join Date: Dec 2009
Location: Slapout, AL
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0L high output
Got the KCs on the stock roof rail. Got four in all now. Looking for 2 more.
Brake caliper stuck on me today and caught some grease on fire.
Complete new front brakes going on Saturday. Anybody suggest in rotors or pads?
Brake caliper stuck on me today and caught some grease on fire.
Complete new front brakes going on Saturday. Anybody suggest in rotors or pads?
#25
Junior Member
Thread Starter
Join Date: Dec 2009
Location: Slapout, AL
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0L high output
Got some new pics of offroading but shows some new build stuff as well. Added the tow hooks to the front and painted the side with bed liner. Its hard to see the be liner but you can compare it to my default pic. Ill get a better one up...
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
02-15-2024 08:09 AM
Cane
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
23
12-11-2015 11:09 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)