Project: Armor!!!
#16
CF Veteran
Join Date: Aug 2008
Location: Hollidaysburg, PA
Posts: 5,603
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0 lt. 242 cu.in.
#18
CF Veteran
Join Date: Aug 2008
Location: Hollidaysburg, PA
Posts: 5,603
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0 lt. 242 cu.in.
#24
CF Veteran
Thread Starter
1 side pic.
All this work but I have yet to fix that pesky licence lamp that keeps falling out
All this work but I have yet to fix that pesky licence lamp that keeps falling out
Last edited by JeepingDan; 07-11-2010 at 05:07 AM.
#25
CF Veteran
Thread Starter
I might as well throw up the pics of my dana 30 I overkilled with strenghening the axle tube and control arm brackets. It was mainly for the control arm brackets cause I've seen somebody wreck them before.
#26
CF Veteran
Thread Starter
A few days ago. I bought a lock right from somebody on the sis forum. had to drive about a hour to get it. But was worth it.
Some people said I wouldint be able to drive on pavement. Thats bull and not true.
it dosint engage until one wheel slips.
if anything this locker made my jeep even more fun to wheel with!
Some people said I wouldint be able to drive on pavement. Thats bull and not true.
it dosint engage until one wheel slips.
if anything this locker made my jeep even more fun to wheel with!
#29
CF Veteran
Thread Starter
Front diff cover.
here's how I did the diff cover. Got the tubes from plumbing section at Home Depot. So far it's holding up good against whatever I bang or scrape it on.
#30
CF Veteran
Thread Starter
just reminder I switched the fill plug to take a 9/16 wrench since now you can't get a ratchet in there. and also theres a possibility of it interfering with the steering if it's out to far or up to high.