Ol' Blue
#1
Seasoned Member
Thread Starter
Join Date: Dec 2010
Location: Castle Rock
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 high output
Ol' Blue
So here is a quick run through of what is already done with my Cherokee
1991 Jeep Cherokee 2 Door Laredo
Engine and Tranny
4.0 High output
5- Speed Manual
Cherry Bomb Glasspack
Tires and suspension
4.5 Rubicon Express
2.0 Level (front and rear)
33 x 12.50 x r15 BFGoodwrench All Terrain
cut fenders
interior upgrades
Alpine CDE-102
6.5 Front boston acoustics
6x9 focal rear speakers
high jack
Exterior Upgrades
Rock Rails
fog lights
custom tail lights
smoked turn lenses
Picture is the first day I got her
1991 Jeep Cherokee 2 Door Laredo
Engine and Tranny
4.0 High output
5- Speed Manual
Cherry Bomb Glasspack
Tires and suspension
4.5 Rubicon Express
2.0 Level (front and rear)
33 x 12.50 x r15 BFGoodwrench All Terrain
cut fenders
interior upgrades
Alpine CDE-102
6.5 Front boston acoustics
6x9 focal rear speakers
high jack
Exterior Upgrades
Rock Rails
fog lights
custom tail lights
smoked turn lenses
Picture is the first day I got her
Last edited by coloradoboy; 12-22-2011 at 04:50 PM.
#4
Seasoned Member
Thread Starter
Join Date: Dec 2010
Location: Castle Rock
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 high output
Well I am gonna fix some small issues with it. Get some new tires. And then hope full start with skids and off road bumpers an what not. Open for suggestions if u think of anything that would be cool to put on there.
#5
Member
Join Date: Feb 2011
Location: Manahawkin, NJ
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
bumpers for sure, other than that just do whatever. you've got a fantastic start as it is. how do you feel about roof racks? I feel like that'd look good on yours.
#7
Seasoned Member
Thread Starter
Join Date: Dec 2010
Location: Castle Rock
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 high output
Originally Posted by Drewjharper1900
Looks good. I cant tell from your pics but some door edge trim will really clean up the cut on your front fenders and make it look good.
Trending Topics
#10
Seasoned Member
Thread Starter
Join Date: Dec 2010
Location: Castle Rock
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 high output
alright sweet thanks i will pick those up after todays projects are over
Last edited by coloradoboy; 12-23-2011 at 10:05 PM.
#11
Seasoned Member
Thread Starter
Join Date: Dec 2010
Location: Castle Rock
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 high output
yes those are c-clamps my bolts on the left side of the brace bar are stripped out right now i spent all day trying to fix them and still have about 3 hours worth of work to do then i will be done, i will post photos soon as the chaos is done.
#12
Seasoned Member
Thread Starter
Join Date: Dec 2010
Location: Castle Rock
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 high output
Pinion yoke
well a couple of weeks ago i snapped a bolt in the pinion yoke and had a hell of time getting it out ended up wrecking the yoke so today i put on a new yoke from the scrap yard. This is after everything is said and done. And of course the photo is upside down... whatever you get the point!
#13
Seasoned Member
Thread Starter
Join Date: Dec 2010
Location: Castle Rock
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 high output
TransferCase Brace Bar
So Since the first week i have owned my car i have had C-Clamps hanging out underneath because for some reason after doing my clutch i messed something up and caused the bolts on the TC to strip out on the driver side so until i could find a solution i just clamped it worked well for a while last week one of my friends told me that he had the same problem with his old XJ and gave me a solution... here is how far my buddy and i got today, more to come when this project is finished.
Making holes in the floor
Moving lift kit to even parts out and prepare for new bolts
So here is how everything went today
1) pull back carpeting in the front
2) Punch holes in floor to open access to original bolts
3) tin snip and open 1" x 5" hole so can insert new bolts
4) Drop TC Bracebar
5) Run out of time with garage space tick of parents c-clamp Jeep back together and call it good for the night!
More info to come soon!
Making holes in the floor
Moving lift kit to even parts out and prepare for new bolts
So here is how everything went today
1) pull back carpeting in the front
2) Punch holes in floor to open access to original bolts
3) tin snip and open 1" x 5" hole so can insert new bolts
4) Drop TC Bracebar
5) Run out of time with garage space tick of parents c-clamp Jeep back together and call it good for the night!
More info to come soon!
#14
Seasoned Member
Thread Starter
Join Date: Dec 2010
Location: Castle Rock
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 high output
i really like my rack they look good now, but maybe a safari rack one day? I have some fun ideas for this jeep
#15
Seasoned Member
Thread Starter
Join Date: Dec 2010
Location: Castle Rock
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 high output