If you look in my picture you can see the holes from the stock bracket where the track bar bracket bolted up. Mine is forward a couple inches. You should be able to use my picture for a close reference.

If you put your coils over the center of the axle tube it will push the front end forward like 2 inches. That's how mine is set up. My drag link actually crosses the tie rod, the pitman arm sits behind the tie rod.

 

So if i push the trackbar bracket forward a couple inches and mpunt the coils in the center itll shove forward?

 

Yes. Well build you coil mounts over the center of the axle tube. Then build your arms and mock up the axle, center it and what not, set it at ride height. Then bolt your track bar up and see where it hits. What kind of track bar are you using? You also have to pay attention to your angles and lengths, what kind of steering are you planning on? You going to the knuckle with the drag link?

I'll just bring mine out and park it next to yours for a few weeks. You can copy it.

 

I have my stock one... i have ordered thw adjustable superlift one online but its on backorder

 

I think thats what mine is. Bushings both end?

 

Yep!

 

Nice, it's been pretty stout. Never had any issues with it.

 

Sweet! Okay so hopefully i can figure itout. Did you plate the unibody below the trac bar?

 

Pull the steering box out. plate the outside, the bottom, and build a new steel spacer. Then after the track bar bracket is welded on you build a brace from the track bar bracket to the passenger side. I am also running a steering box brace. AND hydro assist. All to keep the uni body from cracking and breaking anymore.

 

That all looks like its in my plans! So sweet i guess!!

 

Also, this sounds like a brilliant idea id have it done in a jiff!

 

Just don't forget to set it at ride hight like what X1994J said. This is very important because it is radius arms. I have the same set up.

 

Set it to ride height before finalizing trac bar?

 

Yeah. Have you even slung the 9" under the rear and bolted it up yet? That'll bolt right in, what are you waiting for?

 

Im waitin on damn parts!! As of right now my leaves and trac bar are backordered til who knows when...