My first 2000 XJ Classic!!!
#107
Member
Thread Starter
Join Date: Apr 2012
Location: Montreal
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: i6 4.0L
Maybe this summer!!! itll be tan like you wanted lol
Alright so small update,pictures will be in a couple days cause im lazy like that
so after bending the pos rough country trackbarand having a crooked steering wheel for the like 5th time, i decided to buy Rubicon Express track bar (RE1660) with the drop bracket. Much beefier then!!!!
Then i decided to finally tackled the vibes i had going over 80kmh even with the sye, i bought myself some 4* degree shims, turns out its still not enough... so ill probably buy some 6* degree shims in a couple weeks and see how that does
btw duratracs are AWESOME in the deep snow!!! will be making a snow wheeling vid soon
Alright so small update,pictures will be in a couple days cause im lazy like that
so after bending the pos rough country trackbarand having a crooked steering wheel for the like 5th time, i decided to buy Rubicon Express track bar (RE1660) with the drop bracket. Much beefier then!!!!
Then i decided to finally tackled the vibes i had going over 80kmh even with the sye, i bought myself some 4* degree shims, turns out its still not enough... so ill probably buy some 6* degree shims in a couple weeks and see how that does
btw duratracs are AWESOME in the deep snow!!! will be making a snow wheeling vid soon
#108
Member
Thread Starter
Join Date: Apr 2012
Location: Montreal
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: i6 4.0L
alright so here are the pic of the new trackbar and shims
one thing i dont get is that the driveshaft look perfectly straight but im still getting vibrations light on the highway
if you guys have any imput dont be shy!
i already bought 6*degree shims but i have a feeling it will be to much or just useless
one thing i dont get is that the driveshaft look perfectly straight but im still getting vibrations light on the highway
if you guys have any imput dont be shy!
i already bought 6*degree shims but i have a feeling it will be to much or just useless
#109
Member
Thread Starter
Join Date: Apr 2012
Location: Montreal
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: i6 4.0L
alright so i haven't updated in a while but basically its a problems that have been going on lately.... front pinion bearing and seal are shot and rear tc seal also sooo yeah but on the good side i finally got a good cat back! i have a glass pack on for a while but it was loud and wasent welded on properly so it was pretty loud and obnoxious so i got a flowmaster super 44 with 2.5 piping from the cat back from performance curve. Awesome deal! gonna get it welded on monday but heres a little teaser ill make a better video in a week or so when the muffler "breaks in"
#110
Member
Thread Starter
Join Date: Apr 2012
Location: Montreal
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: i6 4.0L
Thread
Thread Starter
Forum
Replies
Last Post
Freda L. Worley Harris
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
7
02-15-2020 04:37 PM
heatherd1977
Jeep Builds
2
09-28-2015 02:21 PM
john,k
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
4
09-27-2015 10:19 PM
Josh Meck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-27-2015 03:16 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)