MY 94 XJ very slow build.
Thread Starter
Senior Member
Joined: Jan 2014
Posts: 558
Likes: 1
From: coon rapids MN
Year: 1998
Model: Cherokee
Engine: 4.0 H.O
Mall crawling. Got bored at work and there happened to be a loading ramp.
No new updates just been driving it and a little wheeling.
No new updates just been driving it and a little wheeling.
Thread Starter
Senior Member
Joined: Jan 2014
Posts: 558
Likes: 1
From: coon rapids MN
Year: 1998
Model: Cherokee
Engine: 4.0 H.O
I need to post new picks I changed them a little.
I used 2 1/2in x 7/16 cleaves pins from home depot 2 washer per side. Then I took the old upper sway bar link bushing and cut it down to make a spacer. What sway bar links are you running I got mine from iro so pretty sure they are wj links they don't have a stim on top.
Thread Starter
Senior Member
Joined: Jan 2014
Posts: 558
Likes: 1
From: coon rapids MN
Year: 1998
Model: Cherokee
Engine: 4.0 H.O
Not much going on. Finally ordered some d windows with 4in of back spacing. Not sure if im going to throw the 33s on them or wait and see if I can find some 35s to put on.
Thread Starter
Senior Member
Joined: Jan 2014
Posts: 558
Likes: 1
From: coon rapids MN
Year: 1998
Model: Cherokee
Engine: 4.0 H.O
Had my little one help me wash the jeep today. And got my 40 buck craiglist score d windows mounted up they are missed matched but for 40 bucks the back spacing is the same just the windows on the rims are a different size.
Thread Starter
Senior Member
Joined: Jan 2014
Posts: 558
Likes: 1
From: coon rapids MN
Year: 1998
Model: Cherokee
Engine: 4.0 H.O
Got stopped by a state boy today. He just wanted to let me know my tires are sticking out a little to far. So of to the junk yard and scored a full set of flares of a 99 xj that was the easy part trying to figure out how to mount them with out cutting or drilling. I ended up using 3m out door double sided tape I cant believe how solid they feel we will see how long it last but it should hold me over until I can buy some real flares.
Thread Starter
Senior Member
Joined: Jan 2014
Posts: 558
Likes: 1
From: coon rapids MN
Year: 1998
Model: Cherokee
Engine: 4.0 H.O
Well the flares are back off just didn't look right to me. Got my Cherokee emblems back on the front finders and installed IRO bar pin eliminators up front. The jeeps all ready to head up to Gilbert next weekend and wheel with the guys from IRO.
Thread Starter
Senior Member
Joined: Jan 2014
Posts: 558
Likes: 1
From: coon rapids MN
Year: 1998
Model: Cherokee
Engine: 4.0 H.O
Installed IRO steering box brace last night fit great. I will be wheeling with the guys from IRO this weekend up north in gilbert mn so I should have some good wheeling pics coming soon.
