Thanks the lights should really finish it off though.

 

Well looks like more issues from the nylock nuts sent with my kit from RC. This time the ones on my upper control arms. Today was my 500 mile recheck of everything since the install. One nylock on the drivers side upper arm would spin freely in either direction but would not makeup or loosen. Had to cut it off and replace the bolt. One nylock on the passenger side would not tighten up anymore but did loosen off to remove it. So i replaced all the nylocks on both arms with regular lock washers and nuts. This is the 4th nylock that has failed on me. Everything has been great with this kit except for these nylocks

 

Had one of those go bad on my Rusty's kit. Planning on replacing every single one of them with split washers and regular g-8 nuts.

 

Well i have most of them replaced now lol.

 

Got the hella lights mounted up over the weekend. Looks good and they work well.

 

Well i picked up a cobra 19 cb and a club member donated a firestick II to me. Need to order a hood mount and get this thing installed next weekend sometime.

 

nice jeep

 

Hey did you ever have to do anything with your parking brake cable?

 

Nope its plenty long

 

Mine was pulled TIGHT when we put the lift on. It was slack before, and didn't set the brake enough to be of any use; but after the lift it's pretty tight - looks like I should replace it.

 

Yeah my 99 is close but ok, and the 01 is a few inches taller so I may have to get a longer one.

 

That is one tight jeep.

 

 

Whats the backspacing on your wheels 3.75?

 

Yes they are.