Lake's Build Thread
#125
Senior Member
Thread Starter
Join Date: Sep 2014
Location: Ohio
Posts: 554
Likes: 0
Received 7 Likes
on
7 Posts
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0L
Originally Posted by SatiricalHen
How did you vacuum the system and recharge it?
#130
Senior Member
Thread Starter
Join Date: Sep 2014
Location: Ohio
Posts: 554
Likes: 0
Received 7 Likes
on
7 Posts
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0L
Wow I forgot about this. Suppose I'll update it. So uh college is done with and life is good (for both the Jeep and myself). Jeep hasn't changed much, but I have 4.56 gears waiting to go into it and a 8.25 with disc conversion. Just need to find the time to do it. Moving back to my hometown in a month or so then should be able to work on it more. Anyways here's some photos
The following users liked this post:
HRDROKN (12-05-2022)
#134
Senior Member
Thread Starter
Join Date: Sep 2014
Location: Ohio
Posts: 554
Likes: 0
Received 7 Likes
on
7 Posts
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0L
Update on the disc brake conversion:
- New hardware for the backing plates
- New brake lines on the axle going to the soft lines
- New wheel studs installed (97 zj)
-Mostly put back together now
Still need to do:
- Reinstall diff cover
-Refill diff fluid
- Confirm parking brake works
- Test drive to see if parking brake shoes need adjusted
Then all I need is an alignment, balancing tires and new leaf springs and leaf spring shims since mine are bent and broken. Then I can finally move into gears!
- New hardware for the backing plates
- New brake lines on the axle going to the soft lines
- New wheel studs installed (97 zj)
-Mostly put back together now
Still need to do:
- Reinstall diff cover
-Refill diff fluid
- Confirm parking brake works
- Test drive to see if parking brake shoes need adjusted
Then all I need is an alignment, balancing tires and new leaf springs and leaf spring shims since mine are bent and broken. Then I can finally move into gears!
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)