Full Bodied One Ton Xj Build
07-18-2016, 02:22 PM
#46
Seasoned Member
Thread Starter
Join Date: Sep 2011
Location: Long Island, New York
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
I finally got around to getting a rear axle and had a shop set the gears in them. Yukon 5:38s, d60 is spooled and a grizzly in the 14. I got the rear axle in and midway setting up the 60
07-18-2016, 02:23 PM
#47
Seasoned Member
Thread Starter
Join Date: Sep 2011
Location: Long Island, New York
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
I got the gas tank in and got the filler hoses and lines run. This is how it looks with the gas tank in, the bottom sits flush with the bottom of the frame rails
07-18-2016, 05:18 PM
#50
Seasoned Member
Thread Starter
Join Date: Sep 2011
Location: Long Island, New York
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
02-08-2017, 01:09 PM
#52
Seasoned Member
Thread Starter
Join Date: Sep 2011
Location: Long Island, New York
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
02-08-2017, 01:16 PM
#53
Newbie
Join Date: Feb 2017
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Thanks for the info! I am actually running RE 3.5" leaf packs, RE boomerang shackle and RC shackle relocators so I may do some thing very similar to swap in a 14 bolt. I would like to lower my stance as you did.
Thread
Thread Starter
Forum
Replies
Last Post
stimp774
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
20
04-16-2017 03:46 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)