First Jeep, project ???
#18
Junior Member
Thread Starter
Join Date: Aug 2010
Location: Detroit Area
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
nice advice, thanks. i read something about that before. sounds pretty scary.
#19
Junior Member
Thread Starter
Join Date: Aug 2010
Location: Detroit Area
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
#20
Junior Member
Thread Starter
Join Date: Aug 2010
Location: Detroit Area
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
#22
Junior Member
Thread Starter
Join Date: Aug 2010
Location: Detroit Area
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
plus i got coil clamps on there too
#23
Junior Member
Thread Starter
Join Date: Aug 2010
Location: Detroit Area
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
lots of pics
Decided to put the pics of the rear lift. Totally forgot about. 2 new RC leaf packs and new BDS shocks. After we were done, the lift looked huge in the back but after a couple weeks it seems like its not as high anymore so i assumed it settled at little bit. I have pretty bad vibes coming from the rear ds i think so im going to try a TC drop.
Everything on the lift was a pain in the as$ to take off and put on and it took much longer than anticipated. I went through like 4 cans of PB blaster and it barely made a difference. Tell me what you guys think.
The old leafs didn't want to come out so we said fck it and just cut them out.
new leafs look awesome.
After its been settling for a couple weeks. Rear doesn't look as high.
Everything on the lift was a pain in the as$ to take off and put on and it took much longer than anticipated. I went through like 4 cans of PB blaster and it barely made a difference. Tell me what you guys think.
The old leafs didn't want to come out so we said fck it and just cut them out.
new leafs look awesome.
After its been settling for a couple weeks. Rear doesn't look as high.
#24
Newbie
Join Date: Oct 2010
Location: Edmonton
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1987
Model: Cherokee
Engine: 4.0L
#25
Newbie
Join Date: Oct 2010
Location: North Carolina
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 Milled Head, Stroked
Looks Great
I used rustoleum paint on my rims and caps. I have an air compressor so I sprayed them with a gun. I spent more time sanding and priming (red oxide) then I shot 4 coats of satin black on them. It was back in the summer so I also let them bake in the sun between coats. Your XJ looks great !
My next project is a trailer hitch/rear hooks and lights!
My next project is a trailer hitch/rear hooks and lights!
#26
Newbie
We actually got some work done today. Finally installed my hood vents.
We also installed the fan shroud I bought a freakin month ago. Also installed new water temp sensor. We all know what those look like so no pics needed. Check engine light is now gone.
I noticed a few degree drop with the hood vents and fan shroud installed. Nothing dramatic but worth it. Right before the 210 marker. I plan on getting some spray on silicone, if it exists, my dad says it does, and spray my injectors and dist cap
Lift should get done this week. I'm getting my shocks on tuesday, BDS 5500.
We also installed the fan shroud I bought a freakin month ago. Also installed new water temp sensor. We all know what those look like so no pics needed. Check engine light is now gone.
I noticed a few degree drop with the hood vents and fan shroud installed. Nothing dramatic but worth it. Right before the 210 marker. I plan on getting some spray on silicone, if it exists, my dad says it does, and spray my injectors and dist cap
Lift should get done this week. I'm getting my shocks on tuesday, BDS 5500.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)