Butch's Big Blue
#61
Seasoned Member
Thread Starter
Join Date: Jun 2011
Location: Michigan
Posts: 535
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 HO
Progress! Got my shackle relocation brackets!
And got my cross member bolted up all the way. I'll either build a new cross member down the road or buy one as idk how this one will last. And I got my 8.5 coils from rusty's!
Now I need to figure out what I'm going to do about floor pans. As there pretty rusted.
And got my cross member bolted up all the way. I'll either build a new cross member down the road or buy one as idk how this one will last. And I got my 8.5 coils from rusty's!
Now I need to figure out what I'm going to do about floor pans. As there pretty rusted.
#62
Seasoned Member
Thread Starter
Join Date: Jun 2011
Location: Michigan
Posts: 535
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 HO
Cleaned bumper up welded on light tabs and she's ready for primer!
Now waiting on brake lines and rear shocks then test driving should be right around the corner!
Now waiting on brake lines and rear shocks then test driving should be right around the corner!
#64
Seasoned Member
Thread Starter
Join Date: Jun 2011
Location: Michigan
Posts: 535
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 HO
Brakes lines on and bleed! All bolts tightened up! Think I need to shove the front axle forward about an inch? All I gotta do is change front diff fluid and should be ready for a test drive!😎
Thread
Thread Starter
Forum
Replies
Last Post
LittleRed94
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
10-06-2015 08:09 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)