BT's 1998 Build Thread
Love the foxes seems a lot of jeep guys have them I'm on my second one now
Thread Starter
Member

Joined: Jul 2011
Posts: 192
Likes: 17
From: AZ
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
Thread Starter
Member

Joined: Jul 2011
Posts: 192
Likes: 17
From: AZ
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
Thread Starter
Member

Joined: Jul 2011
Posts: 192
Likes: 17
From: AZ
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
Update. My front upper control arm bushings had seen better days. Got tired of the clunking and decided rather than stock replacements, I'd go with Johnny Joints. Here's a few pics. After replacement, all I can say is wow. I didn't realize how bad it drove with the worn out bushings until I replaced them. Drives like a Caddy now. Well, not really, but it's a lot better.
16 year old bushing . . . pretty sad.

Driver's side after removal.

New shiny Johnny Joint. Yes, that's frost on there. I put it in the freezer for a couple hours before I attempted the install.

Driver's side after install.

Passenger side before.

Modified stock bracket.

New Johnny Joint with bracket.

Done . . . just needs a little paint.
16 year old bushing . . . pretty sad.

Driver's side after removal.

New shiny Johnny Joint. Yes, that's frost on there. I put it in the freezer for a couple hours before I attempted the install.

Driver's side after install.

Passenger side before.

Modified stock bracket.

New Johnny Joint with bracket.

Done . . . just needs a little paint.
CF Veteran

Joined: Apr 2012
Posts: 1,843
Likes: 2
From: Ross Vegas, Ga
Year: 2000
Model: Cherokee
Engine: 4.0 w/ tupy head
just read your whole thread. Nice build. I used your hilift mount idea about 6 months ago. I just bought a dana 30 hp to swap in my jeep and plan on using johny joints to replace the beat up bushings. Do you have the part #s you used so I cant screw up and order the wrong size..thanks Heath
Thread Starter
Member

Joined: Jul 2011
Posts: 192
Likes: 17
From: AZ
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
just read your whole thread. Nice build. I used your hilift mount idea about 6 months ago. I just bought a dana 30 hp to swap in my jeep and plan on using johny joints to replace the beat up bushings. Do you have the part #s you used so I cant screw up and order the wrong size..thanks Heath
Thanks. Here you go . . . http://www.currieenterprises.com/ces...t.aspx?id=1277
CF Veteran

Joined: Apr 2012
Posts: 1,843
Likes: 2
From: Ross Vegas, Ga
Year: 2000
Model: Cherokee
Engine: 4.0 w/ tupy head



