"The Blue Prius"
Thread Starter
CF Veteran
Joined: Nov 2011
Posts: 7,387
Likes: 10
From: City of Trees, CA
Year: 93 2 door
Model: Cherokee
Engine: 4.0
No those are 35s. It's 6.5" lift. I have a set of 33 ATs on another set of steelies that don't have all that much tread. Do you think I should just run the 33s until I have some money to beef the axles up? I know I really shouldn't be running 35s on jeep axles but how can I say no if I have a nice set of 35s sitting there. I wanted to have a 4" lift and 33s but I just happened to get a good deal on this. Do you think an 8.8 and beefed up Dana 30 will handle 35s okay?
Seasoned Member
Joined: Jul 2012
Posts: 274
Likes: 0
From: sacramento
Year: 1995
Model: Cherokee
Engine: 4.0 ho
Hey i just have to put the lift on weld on my slides get my 33s ill be ready an wats you talkin almost over its just begin snow wheeling buddy cant wait
Junior Member
Joined: Nov 2011
Posts: 97
Likes: 0
From: Sacramento, CA
Year: 1992
Model: Cherokee
Engine: 4.0L I6
Your jeep is looking good man. That white one is sneaky's jeep right? I've been driving mine for a couple of days now and I took it for a test run at Lomida and haven't wheeled it since. All I have to do is toss the dana 35 and I think I need bump stops but maybe not that bad because it looks like your coil is unseated quite a bit in one of the pictures. What do you do to keep your coil from falling out the bottom? Do you just use the stock clip thing or what? Seems kind of ballsy.
Thread Starter
CF Veteran
Joined: Nov 2011
Posts: 7,387
Likes: 10
From: City of Trees, CA
Year: 93 2 door
Model: Cherokee
Engine: 4.0
yes it's sneaky's jeep. we're going to lomida this weekend wanna come? maybe prairie city too. yes my coil is held in by that stock retainer. it wont come unseated though, my short arms are maxed out. and my shocks limit my uptravel perfectly so I don't use bumpstops.