Go Back  Jeep Cherokee Forum > Technical Discussion > Jeep Builds
93 Cherokee Country before and after >

93 Cherokee Country before and after

Jeep Builds Make your own jeep build thread here, discuss and view jeeps here. All Jeep models are welcome here.

93 Cherokee Country before and after

Old 02-21-2011, 01:08 PM
  #1  
Junior Member
Thread Starter
 
Join Date: Aug 2010
Location: Florida
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
Year: 1993
Model: Cherokee
Engine: 6 cyl
Default 93 Cherokee Country before and after

So I have been doing some things to my XJ the past few months. Here are the before and after shots. New tires 31's and a 3inch lift.


I want to add an better than stock muffler to give it a little deeper sound so I am in the market for that addition. Any suggestions for what sounds best on the straight 6 would be great. Thanks
Attached Thumbnails 93 Cherokee Country before and after-post-paint-2.jpg   93 Cherokee Country before and after-3inch-lift.jpg  
twindad222 is offline  
Old 02-21-2011, 02:52 PM
  #2  
Junior Member
Thread Starter
 
Join Date: Aug 2010
Location: Florida
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
Year: 1993
Model: Cherokee
Engine: 6 cyl
Default

Here are a couple more photos.
Attached Thumbnails 93 Cherokee Country before and after-dsc_0022.jpg   93 Cherokee Country before and after-dsc_0026.jpg  
twindad222 is offline  
Old 02-21-2011, 03:00 PM
  #3  
Newbie
 
Join Date: Jan 2011
Location: Denver, CO
Posts: 24
Likes: 0
Received 0 Likes on 0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L HO
Default

Looking great! Mine is a 93 as well.

I just removed my 31's however. But yours looks great.

What happened to your front window trim, drives side? Did the upper clips break?
The White Knight is offline  
Old 02-21-2011, 03:01 PM
  #4  
CF Veteran
 
Irongrave's Avatar
 
Join Date: Mar 2008
Location: Florence SC
Posts: 2,266
Likes: 0
Received 1 Like on 1 Post
Year: 1996
Engine: 4.0
Default

looks good man
Irongrave is offline  
Old 02-21-2011, 03:21 PM
  #5  
Junior Member
Thread Starter
 
Join Date: Aug 2010
Location: Florida
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
Year: 1993
Model: Cherokee
Engine: 6 cyl
Default

Yes, the clips broke last week. I was just going to add a epoxy under there to fix it. Any other suggestions?
twindad222 is offline  
Old 02-21-2011, 03:55 PM
  #6  
Junior Member
 
Join Date: Apr 2009
Location: Tunkhannock Pa and yes its the sexting town
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L High Out Put
Default exhaust

i have a 96 with a straight six high output i dont know if yours does but i have a dynomax exhaust it was $120 ship it was off of ebay but it comes with muffler and pipe back with a polished stainless tip its actually all stainless but its a good exhaust it could be a little more throatie but it works fine for the price come paired to borla
4x4 for life is offline  
Old 02-21-2011, 04:07 PM
  #7  
Junior Member
Thread Starter
 
Join Date: Aug 2010
Location: Florida
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
Year: 1993
Model: Cherokee
Engine: 6 cyl
Default

That sounds pretty good but I am going to have to have someone weld for me so cost goes up from there. I just talked to my local shop and the guy I spoke with suggested Insynerator mufflers. $69.00 plus install. From what I am reading online might not be a bad option vs. Flowmaster, etc. Has anyone used these on the straight 6? How is the sound vs. a V8? Thanks
twindad222 is offline  
Old 02-22-2011, 06:27 AM
  #8  
Junior Member
Thread Starter
 
Join Date: Aug 2010
Location: Florida
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
Year: 1993
Model: Cherokee
Engine: 6 cyl
Default

Bump
twindad222 is offline  
Old 02-22-2011, 01:38 PM
  #9  
Newbie
 
crazyxj88's Avatar
 
Join Date: Feb 2011
Location: Purcellville, Va
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0 liter straight 6
Default

I have a magnaflow on mine and it has a deep roar to it
crazyxj88 is offline  
Old 02-23-2011, 07:38 PM
  #10  
Junior Member
 
Pluckxj's Avatar
 
Join Date: Jun 2010
Location: South Jersey
Posts: 48
Likes: 0
Received 0 Likes on 0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
Default

just wondering, what kind of paint did you use for the rims? i took mine off because they looked horrible, but the black looks so much better... looks nice though
Pluckxj is offline  
Old 02-23-2011, 08:08 PM
  #11  
Junior Member
Thread Starter
 
Join Date: Aug 2010
Location: Florida
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
Year: 1993
Model: Cherokee
Engine: 6 cyl
Default

Thanks I like the way they turned out as well. I used Dupli-color High Temp. Spray paint. I did two coats.
twindad222 is offline  
Old 10-13-2011, 03:15 PM
  #12  
Member
 
Bmkerner's Avatar
 
Join Date: Sep 2009
Location: Southern Indiana
Posts: 195
Likes: 0
Received 0 Likes on 0 Posts
Year: 1996
Model: Grand Cherokee
Engine: 5.2L V-8
Default Nice

Looks good so far
Bmkerner is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
investinwaffles
Modified XJ Cherokee Tech
8
02-26-2019 06:56 PM
bjatwalker
Introductions
12
09-11-2015 12:20 AM
Cherokeewaterfowler
Modified XJ Cherokee Tech
5
08-26-2015 12:31 PM
Gtrsrlly
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
08-25-2015 11:50 AM
ROCKRIDGE 4WD
Vendor Showcase
0
08-20-2015 01:46 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread
Quick Reply: 93 Cherokee Country before and after


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
 
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in: