Uni body stiffeners. I plane on running long arms by the end of summer (homemade of course) so i need a good point to attach them to. This is what i cam up with. I had some 1/4 tread plat laying around so that is what i used. all the seems are welded up now but dont have pics. Should be welded on in a few weeks. again got love being able to cut up a parts jeep.

 

thats it for now. I hope to get more done and some stuff installed in the next week or 2. 2 kids, a wife and limited funds are limiting what i can do at the moment but will try to keep building and up dating

Any coments or concerns would be appreciated

 

O yeah a few more things that are sitting in my cabinet. 01 jeep 4.0 intake. 4.2 crank and rods. 4.10 d30 gears. a self bored 62mm throttle body. and neon injectors

stroker will be a long time coming though

 

that is a pretty awesome bumper. i like it more then alot i see anywhere else...it doesnt stick out with a giant hoop like alot of them do, but its still got a brush gaurd. nice build, looks like your always doin something

 

I have sleeping problems. I get an idea in my head and i think about it to the point of almost no sleep until i build it. sucks that i dont have more cash to build more stuff. id get alot more sleep

 

need some color help also. Im down to flat black or bright *** orange with flat black (hurculined) trim

opinions?

 

Lol love the title man... I'd just do the flat black cause you know she's gonna get some dings & dents, so might as well just be able to do a quick touch up with some flat black!
Nice build man!!!

 

yeah but the flat black i have is ppg hot rod black (actual one stage paint) if i did bright *** orange it would be poof can that is easily found at evey auto parts store. Flat black spray paint fades horribley fast so i would never poof it flat black

 

then paint it bright *** orange haha. i know how you feel with the sleep...the only way i get more sleep is by sleeping in on morinings haha, otherwise im up doin something

 

[QUOTE=posjeepxj;495116]I read alot on a ton of different forums. Anything you can do to improve your jeep that doesnt cost alot i will try. This one works and works well. I removed my stock mech fan and installed a elec i had laying around. The fan was off a 96-99 ford taurus, but almost any reasoniblely flat 16in fan will work. dont have any installed pics just what it looks like out of jeep. A 16in fan fits rite into stock shroud. I also had to relocate the radiator .75in forward for a little more clearence. Thermo switch was like $23 and the relay was $8 the misc fuses and wiring was around $15. When it was all said and done i gained 1-2 mpgs and it made a noticible power difference

can you do a write up on how to wire this? ive been wanting to do it but just dont know how to wire it to make it automatic

 

go bright *** oarnge out of spray can dings wont hurt as bad wen you can fix it with a 5 dollar can from advanced

 

you forgot the interior swap and yes bright *** orange

 

x5 bright *** orange i painted the lower half of my jeep flat black it looked good for about a month.

 

[QUOTE=krkx93;495349]I will try to get some pictures tomorrow. If you have to ask about how to wire your best bet might be to go to orielys (a local parts store) and ask about an electric fan controler. they come pre wired with a relay, adjustible thermo switch and wiring. They are only about $15 more than the way i did it.

 

build looks good. i just made some long arms for my jeep and i was $220 for everything and that is welded and on the jeep. keep us updated.