31"s good idea or bad idea for 4.5 lift??..
Thread Starter
Junior Member
Joined: Mar 2011
Posts: 66
Likes: 0
From: Missouri
Year: 2001
Model: Cherokee
Engine: 4.0
Hey guys.. i got an 01 cherokee im about to lift i hope by the end of the month. im going with the rough country 4.5 suspension lift and was thinking about getting 31" tires over 33" mostly because of the price.. should i hold off for 33"s or do you guys think the 31"s will do ok?
Any advice would be great hear! thanks in advance.
Any advice would be great hear! thanks in advance.
CF Veteran
Joined: Mar 2009
Posts: 2,287
Likes: 0
From: Westfield, MA
Year: 1999.
Model: Cherokee
Engine: 4.0, I6
Hey guys.. i got an 01 cherokee im about to lift i hope by the end of the month. im going with the rough country 4.5 suspension lift and was thinking about getting 31" tires over 33" mostly because of the price.. should i hold off for 33"s or do you guys think the 31"s will do ok?
Any advice would be great hear! thanks in advance.
Any advice would be great hear! thanks in advance.
Thread Starter
Junior Member
Joined: Mar 2011
Posts: 66
Likes: 0
From: Missouri
Year: 2001
Model: Cherokee
Engine: 4.0
What im thinking is start with the 31" and move up to the 33"s after awhile. im new the off road scene so im startin kinda simply to get in the groove of things!
Junior Member
Joined: Jan 2011
Posts: 83
Likes: 0
From: Converse, TX
Year: 1999
Model: Cherokee
Engine: 4.0 I6
31's are perfect on a 3 - 3.5" lift. They would certainly work with 4.5" lift. The 33" might rub. The bigger issue is with a 4.5" lift you should get a SYE and CV drive shaft. So the cost difference is not just the difference in the lift kit.
Thread Starter
Junior Member
Joined: Mar 2011
Posts: 66
Likes: 0
From: Missouri
Year: 2001
Model: Cherokee
Engine: 4.0
im currently running this exact setup and not gonna lie i hit my diffs all the times on rocks, its a good setup and looks good you just dont have the same clearance you would with 33s, thus being said once it gets warm enough im going to be installing my 6.5" LA kit with 33s 
Trending Topics
Thread Starter
Junior Member
Joined: Mar 2011
Posts: 66
Likes: 0
From: Missouri
Year: 2001
Model: Cherokee
Engine: 4.0
i have def planned on the cv drive shaft alittle later down the road.. the SYE i havent thought about to much but what are my big disadvantges without it?
Go with the 33's. You never regret going bigger, but it's not so true the other way around. They can be more expensive, but you'll like the look a lot more too. I say look around for some pictures with that much lift and whatever size tire you're looking at. 31's look good on 3" lifts, but might be a little small for 4.5".
Junior Member
Joined: Jan 2011
Posts: 83
Likes: 0
From: Converse, TX
Year: 1999
Model: Cherokee
Engine: 4.0 I6
You need to use a SYE to use a CV shaft. They are always recommended when you lift higher than 3.5". If you don't use them your stock output shaft will pull too far out of the TC and cause damage or at least a bad vibration.
Thread Starter
Junior Member
Joined: Mar 2011
Posts: 66
Likes: 0
From: Missouri
Year: 2001
Model: Cherokee
Engine: 4.0
So are you saying its required to have the SYE and CV shaft with 4.5 lift?
Thread Starter
Junior Member
Joined: Mar 2011
Posts: 66
Likes: 0
From: Missouri
Year: 2001
Model: Cherokee
Engine: 4.0
Go with the 33's. You never regret going bigger, but it's not so true the other way around. They can be more expensive, but you'll like the look a lot more too. I say look around for some pictures with that much lift and whatever size tire you're looking at. 31's look good on 3" lifts, but might be a little small for 4.5".
Thread
Thread Starter
Forum
Replies
Last Post
seansr
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
Oct 20, 2025 02:48 PM
investinwaffles
Modified XJ Cherokee Tech
11
May 18, 2021 12:02 PM
kdot
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
Nov 12, 2018 07:00 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



