pritt2933

Hello Cherokee forum. I need some help starting a 3in lift build. I found a kit on roughcountry.com has everything I need except the adjustable track bar I think. I just need to know the backspacing and recommended tire size. And anything else that can help me out. I'm a noon at all this and my first build. And suggestions and tips are greatly appreciated.

Here's the lift u want to get http://www.roughcountry.com/jeep-suspension-lift-kit-670x.html

pritt2933

There is a lot of work I want to do to it. And I need a lot of help any suggestions and help is greatly appreciated

BlackHart

Are your stock springs good? No sag? That kit only has add a leaf, not a new leaf pack, if your leaves are sagging it won't give you the result youre looking for

unidentifiedbomb

There's a thread for lift questions. Build threads are dedicated to the build of your jeep. Unless you plan on recording your build here then it's fine.

pritt2933

My leaf spring are sagging I will have to get new ones. And I will show my progress through out my build, it a just goning to take some time just because of my money situation. I have a lot of ideas I want to do. I just need some help and direction on this lift. Sorry this is my first post on this forum

BlackHart

http://www.roughcountry.com/jeep-suspension-lift-kit-630.html

if it was me, I'd get that, that way you get actual lift leaf springs instead of just the add a leaf

pritt2933

Ok thano you. That looks like the way to go. Any suggestions on tired size and back spacing? And how is the installation?

BlackHart

As for that I can only comment on doing the front part as I have not lifted the rear of my jeep yet (waiting on parts) But doing the front springs is easy, provided you have access to a spring compressor, I rented one from auto zone to do mine

pritt2933

Besides a adjustable track bar is that all I will need to do the whole lift?