well this is my jeep so far i got it last month and it had the 3 and a half inch lift with spacers in the front and blocks in the rear. the tires are 31 12.50s. dick cepecks. i am planning on lifting it more and want to go with quality parts. im thinking a 5.5 inch lift with 33s. front and rear bumbers, roffrack,lights all the way around, chip intake, maybe some other odds and ends but i dont want to do it cheep or have it look like something original. i am not sure about cutting out for fender flares because i want it to be straight. any suggestions, tips, or comments on where to go with it would be greatly appreciated..

 

u're xj looks nice already

 

Good looking ride.

 

Well since you want to do it right, I recommend reading this entire build thread. He runs 33's on 5.5" of lift with no trimming, and it's by far one of the cleanest, most well-executed XJ builds I've seen.

http://www.naxja.org/forum/showthread.php?t=913774

Keep us posted on your build, and good luck!

 

Nice

 

heck of a start already, dang

 

looks nice already bro!bump!

 

nice, not a speck of rust anywhere

 

thanks guys and brad ill check out that post im new to this site so im still trying to figure it out. what kinda bumbers should i look into i want something tough with i winch but dont wanna spend a arm and a leg? any ideas would be great

 

Good list of bumper options here; https://www.cherokeeforum.com/f59/he...your-xj-44500/

If you can weld or have access to someone who can, the Logan's Metal setup is probably one of the least expensive options.