93XJeeper

Here's a few updates, I finished my toolbox, put some ZJ black rims on it, put some ZJ power seats in it, installed an overhead console, install LED interior and gauge lights, installed some new autopal headlights, harness, and H4 bulbs, installed some LED cubes, replaced the Catalytic Converter, installed ZJ steering, put in a CB radio, swapped in a 97 up console, replaced the radiator, rebuilt and installed 703 injectors, put a new fuel pump in, and installed a new front driveshaft. Oh, and now that I've finally got it caught up in maintenance, I have started putting money aside for my metalcloak lift kit.

65BAJA

The headlight relay harness helped on my '93 XJ when I put some IPF headlights in it back in the day. Still didn't keep the in cab headlight switch from going out though. Check for heat around the switch after the headlights have been on for a while just to be safe.

93XJeeper

Put some carpet in and it's much quieter now. Now I'm thinking about putting some peal and seal inside the doors

Sethers775

Where did you get the overhead console?

93XJeeper

junkyard, I got a spare for sale if your interested. Not sure what year your jeep s but there is a different type of overhead console for the 97 up jeeps. They come from the factory but are really rare and can be hard to find. https://www.cherokeeforum.com/f74/je...onsole-225543/

93XJeeper

Put new freeze plugs in the block as well as new Monroe shocks all around and .75" spacers and new bump stops up front. Lift kit is gonna be on hold for a while cause I spent the money on another toy instead. lol.

93XJeeper

Somewhat of a big update! New control arm bushings as well as some S10 Bastard packs and ZJ coils along with the ZJ spring isolators and .75" spacers.

93XJeeper

Also, new Walmart special rustolium paint job! Pics of the before and after of the lift and paint. Lift was about a 3" finished.

93XJeeper

New wheel hubs, axle tube seals, ujoints, ballpoints, and made some motor mounts.

93XJeeper

New rims, 31s soon! Got ZJ disks, master cylinder, and booster installed! Also threw on an RC adjustable trackbar, and finally got an s10 steering box to install.