1993 Jeep Cherokee XJ Budget Build
Hey guys, I figured i'd make a thread on my XJ Build. Here she is when I first bought her.
https://cimg6.ibsrv.net/gimg/www.che...dbee197c4c.jpg https://cimg7.ibsrv.net/gimg/www.che...f9fd86c4dd.jpg I removed the brush guard thing, thought it looked kind of funny and the lights didn't work any ways. https://cimg8.ibsrv.net/gimg/www.che...7648318753.jpg |
Doing a little flexing after trimming the fenders and some better but still ugly rims
https://cimg0.ibsrv.net/gimg/www.che...e854904bd5.jpg https://cimg1.ibsrv.net/gimg/www.che...0873239a01.jpg https://cimg3.ibsrv.net/gimg/www.che...3f2c55a0ee.jpg https://cimg4.ibsrv.net/gimg/www.che...2b625528e6.jpg |
Here is where im at presently. Just got a fresh tune-up!
https://cimg1.ibsrv.net/gimg/www.che...58bd2a25d0.jpg New steering box (remanufactured). haven't got it installed. Im gonna order the JCR steering box spacer first. https://cimg2.ibsrv.net/gimg/www.che...254271a11e.jpg Ripping out the interior to put new floors in and bed liner down. I got another thread specifically for this if anybody's interested. https://cimg3.ibsrv.net/gimg/www.che...fd3082af5f.jpg https://cimg4.ibsrv.net/gimg/www.che...e110f549e8.jpg https://cimg5.ibsrv.net/gimg/www.che...efbec28a92.jpg https://cimg6.ibsrv.net/gimg/www.che...5023158779.jpg https://cimg7.ibsrv.net/gimg/www.che...d93ff401fe.jpg https://cimg8.ibsrv.net/gimg/www.che...19710252e1.jpg https://cimg0.ibsrv.net/gimg/www.che...464e6ce5fa.jpg What I thought was a bad exhaust leak was actually this flow master exhust! Never knew I had it! https://cimg1.ibsrv.net/gimg/www.che...92443b87a7.jpg was gonna remove transfer case for rebuilding. this is all the fluid that was in it. opps https://cimg2.ibsrv.net/gimg/www.che...15678bf319.jpg |
1 Attachment(s)
Pulled the transfer case out today, fixing to finish tearing it down som time this week.
|
2 Attachment(s)
Got the transfer case open, ordered some bearings and seals. All the gears look fine, looks like the previous owner may have been in it before but I'll get it put back together and installed soon. I'm guessing I should use ATF 4?
|
1 Attachment(s)
Got the transfer case back in, replaced all the seals and the bad bearings. Filled it up with ATF 4. Now that Ive finished that project, Im gonna get started on the floors again.
|
Wish my floors looked like yours. That's next on the project board. Good start.
|
3 Attachment(s)
Spent a couple hours today to clean the engine with a couple rags and a tooth brush. Yet it's still dirty. Haha! I'm sure you'll notice the high mounted 130 amp ZJ alternator.
|
3 Attachment(s)
Ordered some parts to replace the rear yoke and started welding the floor boards.
|
6 Attachment(s)
Figured I'd update the thread. Finished the floors and bed lined. Installed all the interior. Not as loud as I thought it would be without the carpet.
|
3 Attachment(s)
My old tranny fluid before I changed it. Lol and also some cool pics. Other things I've done but didn't get pics of include: new steering box, new power steering pump, finished rear end, extended all the breather lines, and a new track bar.
|
Subcribed
|
1 Attachment(s)
Jeep parts! New exhasut manifold, 02 sensor and map sensor
|
5 Attachment(s)
Picked up this baby at he junk yard for $50! Gonna bend it back to shape and weld what needs to be rewelded. Anybody know what company made this bumper? I couldnt figure it out.
|
All times are GMT -5. The time now is 06:52 PM. |
© 2024 MH Sub I, LLC dba Internet Brands