Well today i started doing my durango box thinking i would just knock it out and be done with it..... negative. First off, i broke my pitman arm puller and had to go rent one. Then when undoing my break lines, i eff'd the return line because it was all gunked up onto the bolt itself so it just twisted off. I managed to save the other line. My buddy from the junkyard is going to try and manage to grab the line off a junked cherokee tomorrow then it should be done.

As of right now, everything is in and tightened. Only thing left is the last line, add fluid, then throw the air filter box back in and I'm done.

Also put some new wipers on it that i got today



Very near future things i need to get done!-
Do my extended brake lines.
Do the CAD mod.
Install my fuel filter.
Buy valve cover gasket and do the jeep tech/cruiser mod to it.



I have like three pics i snapped real quick





Then i have my spacer which was actually in really good condition, was still intact, no cracks or anything so i decided to re use that instead of building one. Im sure it will hold up fine.

I'm thinking about buying those tires, how do you like them?

I love them, great on and off the road!! Very good price. i paid $750 for all 5

Finished my Durango box today, it's a bit tight but I like it. A lot better then my old busted box. So happy. Other then breaking the return line when undoing it off the old box, it was a breeeezzze. Broke a pitman arm puller though waiting for some funds to build up to buy 1 ton steering. Then getting an alignment.

Work tomorrow, but Sunday if I don't go wheel for a bit then I'm gunna do two things.

1- cad mod to front axle

2-clean the damn inside up

Well, no new things really. Its been stupid cold here lately so i have yet to do any thing to it. Now my damn battery is done! So i have to save up a couple extra and do it.

Picked up the cummins so now thats my daily driver.

Thinking about locking the front and rear now since its not going to be a daily. But ill still want to drive it on the road so im in between on that.

Soon as i get a warm day ill get some stuff done. Cleaning the inside up is the first thing, then im going to get a few pieces of wood and start on some type of shelf for the back so i can mount my On board air and my power inverter. Also going to try and get the valve cover gasket done and then see where else its leaking from.

Did the cad mod finally after putting it off forever.

The clips on that thing are a PITA for sure.
After i figured out what i needed to do with the clips and what not it wasnt bad, just had to slide the thing over and put it back together.

Getting prepared for the 12-16 inches of snow coming in.!

got to play a little bit

Jeep made easy work of the 18 inches of snow

Love the kenda klevers!

I was wondering what your thoughts are on the Kenda's now that you've had them for awhile?
I'm looking at getting them in a 33/12.5, the price is impossible to pass up. How many miles do you have on them? They look like they did well in the snow?

.

They were amazing in the snow, i have since sold them. But they were great tires and absolutely cannot be beat for the price.