should be getting my new 8.8 back within the next day or two from getting regeared and some other things welded on

 

Cool deal. Did u happen to ask if hill regear my jeep for me ill pay

 

well he said he's not wanting to do them cause its a pain in the *** atleast the d30 the shims are between the bearing and carrier most are shimmed between the bearing and the axle

 

would anyone be able to help me do an sye when i get my tax return money im going to drop it into my jeep and get her set up right. Im only 18 so im no expert and my dad doesnt know how to put one in so would some one be willing to help me put on one or tell me of a place that could do it for cheap.
thanks

 

Full sye or hack and tap

 

id like to do full but thats with everything going my way , also can some one tell me some good full sye's and some good hack n taps

 

hack and tap kits use the stock shaft and are not nearly as strong as the upgraded shaft that comes with the full sye. But you'll half to check around

 

Get the advance adapters slip yoke eliminator and I'll help you install it i did mine

 

alright that would be great , what brand did you get?

 

I got the Advance adapter sye

 

X2 its what I'm running and would also be glad to help

 

X3, same here. I'm also running the Advance Adapters SYE Kit. That would be the one to get.

 

Does anyone here have a welder? I'm looking to remove my doors come March or April and want to do the drop in mod so ill need some bolts welded in place.

 

You can reuse your door pin it will also fit better

 

just re use the pin that's already in it...try and leave the little bushing sleeve in there that goes around the pin, it takes up some of the slack between the pin and the hinge. I took mine out and you could pick the door up and down inside the hinge, so I wish I didn't take that bushing out now but I just recently drilled it out for a bigger pin so I have no more slop