New years day run to GWNF
Senior Member
Joined: Mar 2011
Posts: 770
Likes: 1
From: VA
Year: 2000
Model: Cherokee (XJ)
Engine: 4L, 6 cylinder, 190 hp, 225 ft lp torque
Hey Brian, I may be joining you. I just put a 3 inch lift on which means that I sheared the rear shock four upper bolts. I'll try to get the shocks on before Sunday.
Knock out the broken bolts/weld nuts with a BFH(I use an air hammer). use 5/16" x 1" bolts, nuts, and washers(TractorSupplyCo). a thin telescoping magnet makes it easier to get the bolts to drop through the holes.
or stop by the shop and I can do it for you
Bryan
Last edited by lynskynbnd; Dec 28, 2011 at 09:41 PM. Reason: spelling
Member
Joined: Sep 2010
Posts: 142
Likes: 0
From: Warrenton, VA
Year: 1996
Model: Cherokee
Engine: 4.0
it is stock friendly, and there are also areas you can push yourself and your jeep. Last time i went out with these guys i was just on a 2" lift and 31s and did almost everything i wanted. now im at 5". we also had 100% stock guy with us as well. its a good time for everyone. Plus its a good group of guys.


