Originally Posted by BmoreCherokee00

Thanks, how much? And what else would I need to lift it 3"

Originally Posted by 96xjclassic

Am not.

Originally Posted by abe froman

fun fun.

never used an eq back in the day but it sounds like you want to run 3 amps off the one line out? should work fine although i'd probably go w/ a true outboard xover rather than one built into an eq. most audiophiles will say that a system is only as good as the weakest link in the chain so you should try and have as few links in the chain as possible. if not running multi amps, i'd stay away from the eq but that's just me.

never heard/heard of fultron but there were alot of manufacturers back then and the price is def. right. can't go wrong w/ older PPI...don't recall exactly what year they threw sound quality out the window. other amps from that era worth considering would be hifonics, mmats, soundstream's reference stuff or a/d/s if you can find em. lanzar's opti stuff was good but i always hated the design for power and ground not having terminals on the amp...wires just ran straight into it. heck rockford and mtx made solid stuff back then compared against most of the big box stuff you find now a days. this isn't my listing but i have this amp in very good condition. 100 bucks if you want it. Precision Power PCX 250 Amp 2 CH PPI 200W RMS 400W Max Amplifier | eBay

Originally Posted by fritzthekatt

So I'm building a early to mid 90's setup and trying to make a decision on an amp and eq.

I've got a Alpine 7292 headunit with one set of rear preouts. From what I remember and the research I've done I need to run those outs into a EQ that can separate front/rear/sub then I can run those to the appropriate setup on the amp and mod the signal from there.

I've got a bead on an Alpine ERE-G180 and a Sony XE-9MKII but can't decide which to go with. Opinions?

Amps on the other hand I have about 5 I'm looking at between Pheonix Gold, JL, Fultron, and PPI but the leader atm is a Fultron. Anyone ever run a fultron way back when and if so would you recommend it?

Originally Posted by Pudgy Fingers

You need a crossover to separate the frequencies not an EQ. I've been running my ppi amps since 96-97.

Originally Posted by kuzican

trails road sunday morning anyone?

Originally Posted by kuzican

i have a nice curve on my leafs and i still have 3 of the stock leafs on there = ) i like my one F-150 leaf in there

Originally Posted by fritzthekatt

What you running PPI wise and what crossover would you recommend?

Originally Posted by fritzthekatt

Damn Abe thanks for the knowledge. My goal is to run 1 multichannel amp for surrounds and subs. Like you mentioned the eq would really just be there to break the signal down so I can run it to the proper channel.

I've seen a few 8 channel ADS amps running around and the others you mentioned. Considered going PPI art route but the multi is just too much $$. JL 500.5 is an option but the back channels only get 25w. Really the only drawback there.

Fultron is Memphis before they changed their name in 97/98 and the amp i'm looking at was their flagship. From what i've read it received numerous awards at CES and rivaled PPI. Buts this is the internet... What it does offer is stupid amounts of power. 75x4 and 150x2 at 4ohm at 2ohm you get 150x4 and 300x2

Originally Posted by Pudgy Fingers

I have the audiocontrol 3xs and ppi art series 600a2 and 400a4. I think that's the model numbers.