Maryland Cherokee Club
CF Veteran
Joined: Feb 2012
Posts: 6,468
Likes: 18
From: Forest Hill, Maryland
Year: 1998
Model: Cherokee
Engine: 4.0L
hahaha, if i was ready to trim I would put them on and trim, but I'm not ready to do that yet. i wonder if the BS would allow it to not rub on the control arms when turning. I really just want to put them on for S&G to see what it's like.
CF Veteran
Joined: Feb 2012
Posts: 5,153
Likes: 0
From: Crofton, MD
Year: 1992
Model: Cherokee
Engine: 4.0 I6, 62mm BBK Throttle Body w/ 1" Spacer, Rusty's Airtube w/ 9" K&N Conical
CF Veteran
Joined: Jan 2012
Posts: 8,272
Likes: 1
From: Baltimore, MD
Year: 1999
Model: Cherokee
Engine: 4.0 I6 HO
soooo.... took my alt to advanced to get tested cause i didn't believe autozone.... tested ok. so i put it back on, cleaned all the connections and it works fine now
let it idle for like half an hour with the lights and radio on and it was putting out 13.2v. so i hope it doesn't just die on me in like a week
let it idle for like half an hour with the lights and radio on and it was putting out 13.2v. so i hope it doesn't just die on me in like a week
Seasoned Member
Joined: Jan 2013
Posts: 253
Likes: 0
From: Anne Arundel County, MD
Year: 1998
Model: Cherokee
Engine: 4.0L
CF Veteran
Joined: Feb 2012
Posts: 6,468
Likes: 18
From: Forest Hill, Maryland
Year: 1998
Model: Cherokee
Engine: 4.0L
Seasoned Member


Joined: Apr 2012
Posts: 494
Likes: 8
From: Glen Burnie Maryland
Year: 1987
Model: Cherokee
Engine: 4.0 6l
any one know if the rubber outer fener that is hld in lace by the out side plastic fender is nedded i am down a fender and its rather lose
CF Veteran
Joined: Feb 2012
Posts: 2,574
Likes: 0
From: Laurel, MD
Year: 1998
Model: Cherokee
Engine: 4.0L



