Maryland Cherokee Club
CF Veteran
Joined: Feb 2012
Posts: 5,153
Likes: 0
From: Crofton, MD
Year: 1992
Model: Cherokee
Engine: 4.0 I6, 62mm BBK Throttle Body w/ 1" Spacer, Rusty's Airtube w/ 9" K&N Conical
Attachment 115312
Obviously the front is a dana 30 but what axle is the rear?
Edit: d35. See kiddies google is your friend.
Obviously the front is a dana 30 but what axle is the rear?
Edit: d35. See kiddies google is your friend.
Jon, charge your cell battery!!!
CF Veteran
Joined: Feb 2012
Posts: 5,153
Likes: 0
From: Crofton, MD
Year: 1992
Model: Cherokee
Engine: 4.0 I6, 62mm BBK Throttle Body w/ 1" Spacer, Rusty's Airtube w/ 9" K&N Conical
::CF Moderator::
Joined: Sep 2009
Posts: 3,495
Likes: 482
From: Glen Burnie, MD
Year: 2001
Model: Cherokee (XJ)
Engine: 4.0l
Originally Posted by nowhres
CF Veteran
Joined: Feb 2012
Posts: 5,153
Likes: 0
From: Crofton, MD
Year: 1992
Model: Cherokee
Engine: 4.0 I6, 62mm BBK Throttle Body w/ 1" Spacer, Rusty's Airtube w/ 9" K&N Conical
How did the second link appear?
And if so, you annoy easily
But I can actually try if you wish...
CF Veteran
Joined: Feb 2012
Posts: 5,153
Likes: 0
From: Crofton, MD
Year: 1992
Model: Cherokee
Engine: 4.0 I6, 62mm BBK Throttle Body w/ 1" Spacer, Rusty's Airtube w/ 9" K&N Conical
Seasoned Member
Joined: Mar 2012
Posts: 411
Likes: 0
From: Glen Burnie, MD
Year: 1999
Model: Cherokee
Engine: 4.0
Finished up the axle today! I ended up gutting the brakes and going all out. New wheel cylinders, e-brake cables, custom hard brake lines, pads, and all the hardware. I was able to clean up the drums with a hard wire wheel in a grinder. There wasn't any pitting or groves so I painted em up put em back on. The first side was the hardest, just trying to figure out the order in which to install so everything stays put. The brake lines took me a while to match the factory bends. I hope to have some time tommorow to do the swap. I also have a set of HD axle relocation brackets to put on.
I picked up 4 u-bolts today from Daves Trailer in Glen Burnie. Paid $24
3" x 7" x 9/16 with nuts. Very beefy and way bigger than the ones that came with the RC lift kit
I picked up 4 u-bolts today from Daves Trailer in Glen Burnie. Paid $24
3" x 7" x 9/16 with nuts. Very beefy and way bigger than the ones that came with the RC lift kit
