I take all me scrap to Psc, very clean and efferent especially if you go when they first open, the other places I have been seem shady

 

If your on Facebook there is a page for it ,

 

I don't think so but could have been. Seemed a bit more bling than Eccos but I could be wrong

 

it was a much better experience then other places ive been, it took me a minute to figure out how to get in, but i ended up with 205lbs of cans at 55 cents per lb and i had a busted up wheel off of my old zj that was 20 lbs and i got 70 cents a lb on it. not a bad deal if i do say so myself.

 

Seems like the aluminum wheels end up being around 18 bucks, you can get money for Old batteries also

 

Not exactly covert, I happen to know Tom and a few of us got a private invite. It's not open yet he's dealing with some government bs. Hopefully by the end of the month. Place is great but unless you're prepared for body damage and breakage, stay on the easy trails. I haven't even seen the difficult trails yet. One of us ends up breaking something and we call it a day. Not that my junk would have a chance on them anyway. Ole Youngpioneer, Travis, held his own even open/open on 31s. Walked hills a K5 on 36s with a semi built 350 had a hard time on. BTW sorry about your bumper.

 

Theres one that runs around in lafayette thats black with painted black eccos with the lip silver, sitting on about 3" and 31s

 

Was Calfee up at toms with my ol yota?

 

He didn't make this one, had to work.

 

Had a blast, got all the steel cut to build the front winch bumper, now to locate and design a beefy rear bumper and finally mount the receiver hitch I've had for months, then save for a locker

 

Charged the battery on the jeep and pulling it in the garage I noticed a gas smell, looks like an injector leaking, need to fix the alternator

 

Broke the weld nut on the upper shackle bolt so all it does is free spin...any fixes??

 

Anyone interested in my lp Dana 30 and my 29 spline 8.25?
Both are 355 and open.
I just spent 250 bucks having the rear axle brakes redone.

Anyone?

 

You'll have to cut a hole so you can get a wrench in there.

 

That sucks...I soaked it the best I could with pb blaster for bout a week then heated the outer side of the frame before talking it off. It started turning then free spun