Chattanooga xjs
Junior Member
Joined: Oct 2012
Posts: 79
Likes: 0
From: Cleveland, Tennessee
Year: 1989
Model: Comanche
Engine: 4.0
Bwhaha right. i had some what luck out of the ones newton built for me, but the bushings worn out. but if you think about it a heim would too over time. i guess thats when pm comes in..
Thread Starter
Old School CF Moderator
Joined: May 2010
Posts: 9,652
Likes: 3
From: Chattanooga
Year: 2001
Model: Cherokee
Engine: 4.0
What about a Johnny joint?
my ruff stuff heimS were good for the time I had them...
Plenty of the bigger rigs run Currie joints though and they work mint
my ruff stuff heimS were good for the time I had them...
Plenty of the bigger rigs run Currie joints though and they work mint
Senior Member
Joined: Oct 2011
Posts: 845
Likes: 2
From: near Chattanooga, TN
Year: 1995
Model: Cherokee
Engine: 4.0L HO
That sounds like a challenge to me!
I'll build you one, if you can tear it up, I'll replace it, within reason. If you're running a Dana 30 still, you'll tear it up first.
I'll accept that challenge, try me!
I'll build you one, if you can tear it up, I'll replace it, within reason. If you're running a Dana 30 still, you'll tear it up first.
I'll accept that challenge, try me!
Senior Member
Joined: Sep 2011
Posts: 508
Likes: 0
Junior Member
Joined: Oct 2012
Posts: 79
Likes: 0
From: Cleveland, Tennessee
Year: 1989
Model: Comanche
Engine: 4.0
Member
Joined: Oct 2011
Posts: 102
Likes: 0
From: Chattanooga, TN
Model: Cherokee
Anybody interested or know anyone interested in the stock wheels and tires off my 98 limited cherokee? Wheels are in great condition.. No rust. located downtown Chattanooga
Last edited by Chris747; Dec 10, 2013 at 08:42 AM.