Any Georgians?
CF Veteran
Joined: Oct 2012
Posts: 2,314
Likes: 3
From: Canton, GA
Year: 1996
Model: Cherokee
Engine: 4.0
Too bad, because http://atlanta.craigslist.org/nat/cto/3712709665.html if you were going to buy a parts vehicle, that'd be a good one.. you could sell the interior quick, as well as the wheels.
Last edited by tssguy123; Mar 31, 2013 at 01:07 PM.
CF Veteran

Joined: Apr 2011
Posts: 3,493
Likes: 0
From: Chickamauga Ga.
Year: 2000
Model: Cherokee
Engine: 4.0
CF Veteran
Joined: Oct 2012
Posts: 2,314
Likes: 3
From: Canton, GA
Year: 1996
Model: Cherokee
Engine: 4.0
looks like it'd be okay... you could get a new computer from the donor as well as everything else... but don't listen to me, i dunno ****.
Hell, the more I look... why can't you just use the block from a donor and just keep everything concerning the coil on?
Last edited by tssguy123; Mar 31, 2013 at 01:12 PM.
CF Veteran

Joined: Apr 2011
Posts: 3,493
Likes: 0
From: Chickamauga Ga.
Year: 2000
Model: Cherokee
Engine: 4.0
https://www.cherokeeforum.com/f5/eng...em-coil-54478/
looks like it'd be okay... you could get a new computer from the donor as well as everything else...
CF Veteran
Joined: Oct 2012
Posts: 2,314
Likes: 3
From: Canton, GA
Year: 1996
Model: Cherokee
Engine: 4.0
Here, re-read my post. 04 block from a TJ won't fit, but any block from 90-01 is interchangeable.
Seasoned Member
Joined: Nov 2012
Posts: 279
Likes: 0
From: Leesburg GA
Year: 2000
Model: Cherokee
Engine: 4.0L
ok - i dont want to start a new thread in the modified section cuz iv already started 2-threads asking about a couple tires (interco M16, BFG AT & MT, Toyo open country MT) so i thought i would ask you guys - i am about to do another mod, and i am still thinking tires - wanting to go with 33x10.5's and as mentioned, i thought BFG, TOYO, and interco wr the only ones out there, come to find out general tire now has there red letter grabbers in a 33x10.5r15 - what yall think? or should i lift my jeep a little higher and later down the road once i upgrade the axles run 35's. im only running a 2" budget lift, im wanting to stay low, so if i did lift it it would just be with a 3" kit. iv got cut fenders now. tires i have now have good tread but sure would like more GC and better grip.
CF Veteran
Joined: Apr 2011
Posts: 14,553
Likes: 1
From: Carrollton, GA
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
ok - i dont want to start a new thread in the modified section cuz iv already started 2-threads asking about a couple tires (interco M16, BFG AT & MT, Toyo open country MT) so i thought i would ask you guys - i am about to do another mod, and i am still thinking tires - wanting to go with 33x10.5's and as mentioned, i thought BFG, TOYO, and interco wr the only ones out there, come to find out general tire now has there red letter grabbers in a 33x10.5r15 - what yall think? or should i lift my jeep a little higher and later down the road once i upgrade the axles run 35's. im only running a 2" budget lift, im wanting to stay low, so if i did lift it it would just be with a 3" kit. iv got cut fenders now. tires i have now have good tread but sure would like more GC and better grip.
CF Veteran

Joined: Apr 2011
Posts: 3,493
Likes: 0
From: Chickamauga Ga.
Year: 2000
Model: Cherokee
Engine: 4.0
X2, I've got the same size km2s. They are reasonably quiet on the road, lighter than a lot of tires. And they do good offroad.
Seasoned Member
Joined: Jun 2011
Posts: 281
Likes: 0
From: north, ga
Year: 1995
Model: Cherokee
Engine: 4.0
ok - i dont want to start a new thread in the modified section cuz iv already started 2-threads asking about a couple tires (interco M16, BFG AT & MT, Toyo open country MT) so i thought i would ask you guys - i am about to do another mod, and i am still thinking tires - wanting to go with 33x10.5's and as mentioned, i thought BFG, TOYO, and interco wr the only ones out there, come to find out general tire now has there red letter grabbers in a 33x10.5r15 - what yall think? or should i lift my jeep a little higher and later down the road once i upgrade the axles run 35's. im only running a 2" budget lift, im wanting to stay low, so if i did lift it it would just be with a 3" kit. iv got cut fenders now. tires i have now have good tread but sure would like more GC and better grip.
Junior Member
Joined: Feb 2009
Posts: 67
Likes: 0
From: Dallas, Ga/Katy, TX
Year: 1997
Model: Cherokee
Engine: 4.0L
On that note, has anyone ran PITBULL tires. I really like all the tread patterns, but afraid durability will be simular to swampers. My swamps only lasted me a year on my daily. I have had my K2's for two years and still have tread left.


