Yee yee! Travis sent them to me last summer. Infinity sound system ZJ. Put up a wanted add. My JY has a bunch... But... They charge for the whole door if it's not ruined. You have to take the whole door off to get them too. If you can't get those plugs, I was just gonna use a bunch of trailer pin connectors.

 

I've just got one trailer pin connector on mine

 

On the way home with everything.

 

He'll yea, when is the swap happening.

 

When ya'll come help

Probably first week of April since it's my spring break. I'll request Tuesday night off so I can work all day Tuesday and Wednesday on it. Hopefully I won't have to though.

Trying to figure out what other linkage I need





Not sure why it's red... Painted... No tag either. All clean fluids though

 

I have saw that tranny before.

 

I posted it in the other thread but I'll post here too.

Don't fool with the stock linkage. Get this thing or just make it.

https://www.cherokeeforum.com/f10/si...inkage-163872/

 

So I still need the floor bracket and handle?

 

Yeah, you need to 4wd shifter assembly but you don't need that stupid factory contraption and the bracket that holds it against the floor.

 

Alright. Now I have to find that ****

 

That's easy... I had one but got rid of it.

 

I should be good to go after I get these brackets I hope. Still need another front driveshaft and u joint straps and bolts.

 

All that's the icing on the cake. Get the trans and t-case installed then go from there.

I have a brand new Tom Woods front shaft that I'll gladly sell you for twice what it's worth.

 

That's what I'm gonna do. Hopefully can get the trans out of the truck tomorrow or Wednesday with some help and them can clean it up a little more. Then pull the cover and do my JB SYE. I have the u joint straps from the front axle so that should work for the front shaft I'm gonna run out back. Guess I should order some shims...

 

You should just sell me the SYE