ohio roll call
#211
Seasoned Member
Join Date: Aug 2010
Location: Williamsport Indiana
Posts: 410
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Wagoneer
Engine: 368 V8
#212
CF Veteran
Join Date: Sep 2010
Location: Cleveland, OH
Posts: 1,761
Likes: 0
Received 3 Likes
on
3 Posts
Year: 91 Limited
Model: Cherokee
The zx6 is in the forsale section. The mustang I want about 3000-3500 depending on how far I get with it.
Also would trade for them.
Starting at 2400$ Its rebuilt/salvage
Mustang is also rebuilt salvage, thats why drivers door and fender needed replace. Guy made mistake of going to insurance.
Mod list.
FFRP strut tower brace
Flex fan
underdrive pulleys
FFRP 1 5/8 equal length shorty headers
Flowmaster american thunder exhaust (turndowns after muffler before axle) FFRP lowering springs
Lakewood rear upper and lower control arms
FFRP clutch
Hurst shorty shifter
FFRP aluminum driveshaft
Tremec 2.95 1st gear set up and world class t5 main shaft
Intake manifold phenolic spacer
Cervinis fiberglass hatch
Cervinis whale tail spoiler
Cervinis stalker front bumper cover
Cervinis 1.5 ram air hood fully functionable
20% tint
Aftermarket pop out sunroof
DEI car alarm (hood pin, proximity, rear hatch, starter kill)
How it is now, except I am working on hood now. It flew up cause pins were not put back in. It will need a paint job to be mint. Interior is about perfect. Minimal rust. new doors/fenders. Cervini's hood/bumper/hatch/spoiler/functional ram air. 140k miles and some extra parts.
Also would trade for them.
Starting at 2400$ Its rebuilt/salvage
Mustang is also rebuilt salvage, thats why drivers door and fender needed replace. Guy made mistake of going to insurance.
Mod list.
FFRP strut tower brace
Flex fan
underdrive pulleys
FFRP 1 5/8 equal length shorty headers
Flowmaster american thunder exhaust (turndowns after muffler before axle) FFRP lowering springs
Lakewood rear upper and lower control arms
FFRP clutch
Hurst shorty shifter
FFRP aluminum driveshaft
Tremec 2.95 1st gear set up and world class t5 main shaft
Intake manifold phenolic spacer
Cervinis fiberglass hatch
Cervinis whale tail spoiler
Cervinis stalker front bumper cover
Cervinis 1.5 ram air hood fully functionable
20% tint
Aftermarket pop out sunroof
DEI car alarm (hood pin, proximity, rear hatch, starter kill)
How it is now, except I am working on hood now. It flew up cause pins were not put back in. It will need a paint job to be mint. Interior is about perfect. Minimal rust. new doors/fenders. Cervini's hood/bumper/hatch/spoiler/functional ram air. 140k miles and some extra parts.
#214
CF Veteran
Join Date: Jul 2008
Location: North Olmsted, OH
Posts: 1,265
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
The zx6 is in the forsale section. The mustang I want about 3000-3500 depending on how far I get with it.
Also would trade for them.
Starting at 2400$ Its rebuilt/salvage
Mustang is also rebuilt salvage, thats why drivers door and fender needed replace. Guy made mistake of going to insurance.
Mod list.
FFRP strut tower brace
Flex fan
underdrive pulleys
FFRP 1 5/8 equal length shorty headers
Flowmaster american thunder exhaust (turndowns after muffler before axle) FFRP lowering springs
Lakewood rear upper and lower control arms
FFRP clutch
Hurst shorty shifter
FFRP aluminum driveshaft
Tremec 2.95 1st gear set up and world class t5 main shaft
Intake manifold phenolic spacer
Cervinis fiberglass hatch
Cervinis whale tail spoiler
Cervinis stalker front bumper cover
Cervinis 1.5 ram air hood fully functionable
20% tint
Aftermarket pop out sunroof
DEI car alarm (hood pin, proximity, rear hatch, starter kill)
How it is now, except I am working on hood now. It flew up cause pins were not put back in. It will need a paint job to be mint. Interior is about perfect. Minimal rust. new doors/fenders. Cervini's hood/bumper/hatch/spoiler/functional ram air. 140k miles and some extra parts.
Also would trade for them.
Starting at 2400$ Its rebuilt/salvage
Mustang is also rebuilt salvage, thats why drivers door and fender needed replace. Guy made mistake of going to insurance.
Mod list.
FFRP strut tower brace
Flex fan
underdrive pulleys
FFRP 1 5/8 equal length shorty headers
Flowmaster american thunder exhaust (turndowns after muffler before axle) FFRP lowering springs
Lakewood rear upper and lower control arms
FFRP clutch
Hurst shorty shifter
FFRP aluminum driveshaft
Tremec 2.95 1st gear set up and world class t5 main shaft
Intake manifold phenolic spacer
Cervinis fiberglass hatch
Cervinis whale tail spoiler
Cervinis stalker front bumper cover
Cervinis 1.5 ram air hood fully functionable
20% tint
Aftermarket pop out sunroof
DEI car alarm (hood pin, proximity, rear hatch, starter kill)
How it is now, except I am working on hood now. It flew up cause pins were not put back in. It will need a paint job to be mint. Interior is about perfect. Minimal rust. new doors/fenders. Cervini's hood/bumper/hatch/spoiler/functional ram air. 140k miles and some extra parts.
No real updates on mine today, he was a little busy at work so not even any pictures..
But he look it over a little and had it in the air and didn't notice any issues underneath which is good.
Motor is on hold, til I can afford to get it, and I think he and his main tech are going to do the swap on a Saturday for me! And it won't be too much just like $100 for his tech buddy and a lot of thanks you and more visits to him!
#215
CF Veteran
Join Date: Sep 2010
Location: Cleveland, OH
Posts: 1,761
Likes: 0
Received 3 Likes
on
3 Posts
Year: 91 Limited
Model: Cherokee
Damn I bet your waiting on those pics!
Yeah I know I'll be able to get something for both, but I won't trade them both for a xj. Not worth it to me, I don't want a 6k$ jeep already built. I figure if I sell them and use the money for a xj and mods!! 8) I guess we will see
Yeah I know I'll be able to get something for both, but I won't trade them both for a xj. Not worth it to me, I don't want a 6k$ jeep already built. I figure if I sell them and use the money for a xj and mods!! 8) I guess we will see
#216
CF Veteran
Join Date: Jul 2008
Location: North Olmsted, OH
Posts: 1,265
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Damn I bet your waiting on those pics!
Yeah I know I'll be able to get something for both, but I won't trade them both for a xj. Not worth it to me, I don't want a 6k$ jeep already built. I figure if I sell them and use the money for a xj and mods!! 8) I guess we will see
Yeah I know I'll be able to get something for both, but I won't trade them both for a xj. Not worth it to me, I don't want a 6k$ jeep already built. I figure if I sell them and use the money for a xj and mods!! 8) I guess we will see
#217
CF Veteran
Join Date: Sep 2010
Location: Cleveland, OH
Posts: 1,761
Likes: 0
Received 3 Likes
on
3 Posts
Year: 91 Limited
Model: Cherokee
And I know it will be done right, and if any shortcuts are taken I'll know which ones. Plus if I make it a slow build I can replace everything as I go with new.
If I'm getting rid of both toys I got to have something reliable and fun!
If I'm getting rid of both toys I got to have something reliable and fun!
#218
CF Veteran
Join Date: Jul 2008
Location: North Olmsted, OH
Posts: 1,265
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Hell yeah, its going to be nice to keep my KJ as a DD and have a toy that I can actually work on, and worry about needing to drive it the next day to class or work.
#220
CF Veteran
Join Date: Jul 2008
Location: North Olmsted, OH
Posts: 1,265
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
I need to work some extra hours for the next couple weeks so I can afford to get that motor...
#222
CF Veteran
Join Date: Jul 2008
Location: North Olmsted, OH
Posts: 1,265
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
I just work at a little mom & pop style hardware store. Its not the best money maker, but it is nice being about 2 miles from home, and very flexible work with my school schedule and with nice people.
I am starting to look for a job at a accounting firm, even just a low end errand runner, or to anwser phones, just to get my foot in the door of a place that I can make some real money once I got my degree
I can tell you I am good with managing my money, and while I am young if I can make a decent salary I will have get a cheap forclosed house in the nice city I live in now that I can fix up (that is what my dad has always done and I have been there helping him so I know my way around doing just about anything to a house) And then I can have a lot of money for toys
I am starting to look for a job at a accounting firm, even just a low end errand runner, or to anwser phones, just to get my foot in the door of a place that I can make some real money once I got my degree
I can tell you I am good with managing my money, and while I am young if I can make a decent salary I will have get a cheap forclosed house in the nice city I live in now that I can fix up (that is what my dad has always done and I have been there helping him so I know my way around doing just about anything to a house) And then I can have a lot of money for toys
#223
CF Veteran
Join Date: Jul 2008
Location: North Olmsted, OH
Posts: 1,265
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
I am actually at work right now, and just helped Mike Brown For those of you who don't know who he is, he was the coach of the Cavs up til last year.
Last edited by bmrrwolfe; 10-13-2010 at 12:52 PM.
#224
CF Veteran
Join Date: Sep 2010
Location: Cleveland, OH
Posts: 1,761
Likes: 0
Received 3 Likes
on
3 Posts
Year: 91 Limited
Model: Cherokee
Nice! Yeah I can do pretty much anything myself, it's a blessing. 8) I wanna move out to amherst or Wellington/Lagrange some thing with some land. I'm over Cleveland. Lol
What hardware store? I did t know there was one out that way?
What hardware store? I did t know there was one out that way?
#225
CF Veteran
Join Date: Jul 2008
Location: North Olmsted, OH
Posts: 1,265
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Also I work at Ingersoll Hardware, in Westlake